2006 Pontiac Grand Prix Gt,rare Supercharged,leather,heated Seats,$99 No Reserve on 2040-cars

Auto blog

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Remember when Pontiac made a Trans Am Kammback grocery getter?

Despite muscle cars having strong reputations as some of the most impractical cars one can buy, they've occasionally had one of the most useful and practical features a car can sport: a hatchback. In the 1980s, General Motors' Chevrolet Camaro and Pontiac Firebird had one, and it added respectable utility to the sports cars. But the people at GM thought they could make the F-Body cars even more useful. So, after a few clay-model experiments, Pontiac built three examples of an extended-roof 1985 Pontiac Trans Am Kammback concept. Spotted by GM Authority, one of these Trans Am Kammbacks (although "shooting brake" seems like the more apt descriptor) is going on the block at the Mecum Kissimmee auction in early January 2019. Reportedly only three of these prototypes/experiments/test mules were built to driveable specs, and this example, VIN No. EX4796, has additional history that might make it the ultimate example. According to Mecum, the show car, which has made appearances at numerous auto shows, also spent some time at the race track — just not as a participant. It was used as a pace car for PPG and IMSA racing and temporarily had a light bar and "two-way communications equipment." Following its pace duty, and after GM stopped the project from going any further, it was put into Pontiac Engineering's private collection for 13 years. Famous Michigan car collector and Pontiac dealership owner John McMullen then bought the car. He eventually sent it to Pontiac specialist Scott Tiemann for a full restoration to the gorgeous condition it is in today. As seen in the photos, the Trans Am features white paint over a gray leather interior. It houses a 5.0-liter V8 under the hood and has a five-speed manual transmission. The wild concept is rare enough to be super cool, but we can't help but think of an infinitely more practical, more modern, more powerful, and arguably more interesting car we'd rather have. Manual Cadillac CTS-V Sport Wagon in Black Diamond anybody? Or, if you don't care about the extra doors, perhaps the Callaway's Corvette AeroWagen is more applicable. Either way, we're in full support of any shooting brakes we can find. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...