2000 Pontiac Grand Prix on 2040-cars

Auto blog

What car brand should come back?

Congratulations, wishful thinker! You've been granted one wish by the automotive genie or wizard or leprechaun or whoever has been gifted with that magical ability. You get to pick one expired, retired or fired automotive brand and resurrect it from its heavenly peace! But which one? That's a tough decision and not one to be made lightly. As we know from car history, the landscape is littered with failed brands that just didn't have what it took to cut it in the dog-eat-dog world of vehicle design, engineering and marketing. So many to choose from! Because I am not a car historian, I'll leave it to a real expert to present a complete list of history's automotive misses from which you can choose, if you're a stickler about that sort of thing. And since I'm most familiar with post-World War II cars and brands, that's what I'm going to stick to (although Maxwell, Cord and some others could make strong arguments). So, with the parameters established, let's get started, shall we? Hudson: I admit, I really don't know a lot about Hudson, except that stock car drivers apparently did pretty well with them back in the day, and Paul Newman played one in the first Cars movie. But really, isn't that enough to warrant consideration? Frankly, I think the Paul Newman connection is reason enough. What other actor who drove race cars was cooler? James Dean? Steve McQueen? James Garner? Paul Walker? But, I digress. That's a story for another day. Plymouth: As the scion of a Dodge family (my grandfather had a Dodge truck, and my mom had not one, but two Dodge Darts – the rear-wheel-drive ones with slant sixes in them, not the other one they don't make any more), I tend to think of Plymouth as the "poor man's Dodge." But then you have to consider the many Hemi-powered muscle cars sold under the Plymouth brand, such as the Road Runner, the GTX, the Barracuda, and so on. Was there a more affordable muscle car than Plymouth? When you place it in the context of "affordable muscle," Plymouth makes a pretty strong argument for reanimation. Oldsmobile: When I was a teenager, all the cool kids had Oldsmobile Cutlasses, the downsized ones that came out in 1978. At one point, the Olds Cutlass was the hottest selling car in the land, if you can believe that. Then everybody started buying Honda Civics and Accords and Toyota Corollas and Camrys, and you know the rest. But going back farther, there's the 442 – perhaps Olds' finest hour when it came to muscle cars.

Junkyard Gem: 2000 Pontiac Grand Prix Daytona 500 Edition

The W Platform proved to be extremely long-lived and versatile for General Motors, remaining in production from 1988 all the way through 2016. You had your Impalas and your Regals and your Cutlass Supremes, and of course the 1988-2008 Pontiac Grand Prix was a W-body. For the 2000 model year, Pontiac made the racy-looking Daytona 500 Edition Grand Prix, an example of which I just found in a Northern California self-service wrecking yard. 2,000 of these cars were made, presumably because it was the year 2000, and each one sports plenty of cool-looking Daytona 500 graphics. Perhaps some Regal owner will buy these seats and swap them. This is the second junked Daytona 500 Grand Prix I have seen recently, after this one in Colorado. The Daytona 500 was about the same as the GTP version, with Eaton-supercharged 3800 engine making a respectable 240 horsepower. Disappointingly, this car has an automatic transmission. It never saw 150,000 miles, unlike most 21st-century W-bodies I see in wrecking yards. Featured Gallery Junked 2000 Pontiac Grand Prix Daytona 500 Edition View 21 Photos Auto News Pontiac Sedan

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...