2003 Pontiac Grand Am Gt Sedan 4-door 3.4l on 2040-cars

Auto blog

Junkyard Gem: 2010 Pontiac Vibe

Just over a month before filing for Chapter 11 bankruptcy in June 2009, General Motors announced that the 83-year-old Pontiac Division would be "phased out" by the end of 2010. Only three Pontiac vehicles were sold as 2010 models in the United States: the Solstice, Vibe and G6 (new G3s were sold here during 2010 but they were all 2009 models, while the G5 was available as a 2010 model only in Canada and Mexico). Today's bit of junkyard automotive history is one of the very last Vibes ever built, found in a yard near Denver, Colorado. This car is significant not just as one of the final vehicles to bear Pontiac badges but also as one of the last cars built by the New United Motor Manufacturing Incorporated GM-Toyota joint venture in California, better known as NUMMI. The NUMMI factory began life as GM's Fremont Assembly, which built its first vehicle (a C-Series pickup) in 1963 and closed in 1982 after building its final vehicle (an Oldsmobile Cutlass Ciera). Rebooted as NUMMI, the first 1985 Chevrolet Nova (an Americanized AE82 Toyota Corolla Sprinter) rolled off the line in December of 1984. A quarter-century and better than eight million vehicles hence, NUMMI shut down production after its last Corolla was finished on April 1, 2010. While there was some noise about the Oakland Athletics building a new stadium on the site at the time, Tesla ended up buying most of the site soon after that. Tesla now builds more vehicles per year there than NUMMI ever did. The Vibe was co-developed with Toyota and based on the same platform as the ninth-generation Corolla. The Toyota Matrix was mechanically identical and was built in Canada, while the Japanese-market version (known as the Toyota Voltz) was built on the same NUMMI line as the Vibe and shipped across the Pacific. The Vibe/Matrix/Voltz got a redesign for the 2009 model year, but few noticed due to all the turmoil in the GM world at the time. The final Vibe was built in August 2009. This car was built in July of 2009, just before the end. It was living in West Texas just prior to coming to Colorado. El Paso is about a ten-hour drive from this car's current location. Once in the Centennial State, it got parked somewhere it shouldn't have been and ended up being auctioned to Pick Your Part. An occupant of this Vibe had time to sample some of the local agricultural products before that happened.

Porsche Boxster Spyder to get GT3's 4.0-liter flat six?

It's been a merry-go-round the past few months, the rumormill focused on what will power the next Porsche Boxster Spyder. First came hearsay of a flat-six going into the special edition of a model line known for its turbocharged four-cylinder engines. Then came tattling that the flat-six in question was the naturally aspirated, 4.0-liter from the 911 GT3. A couple of weeks ago we wrote " we'd be surprised if Porsche packed anything other than a turbocharged flat-four under the skin." But Autocar has a new report that, indeed, a downtuned version of the 500-horsepower 4.0-liter from the GT3's rump will move to the Boxster Spyder's midsection. The Autocar piece follows a Wheels magazine article from last November, and the prediction isn't outrageous. When Car and Driver reviewed the last Boxster Spyder, it wrote, "the hand-me-down six comes from the older 911 Carrera S, not to be confused with the new turbocharged 3.0-liter flat-six that powers the refreshed 911." If we can believe a recent report from Automobile about the 992-series 911 due later this year, the same thing is happening: The 991.2-series GT3 bequeaths its powerplant to the smaller sibling, and the 992-series GT3 moves to a 3.8-liter, twin-turbo flat-six with around 550 hp. Autocar quotes Andreas Preuninger, the Porsche engineer leading the development of all of these wunderkinds, saying of the Boxster earlier this year, "Natural aspiration is one of our main USPs. ... [We] think we can achieve throttle response and immediacy a little bit better with an atmospheric high-revving engine than any kind of turbo." We'll guess that means, by inference, that the GT3 is about to age out of naturally-aspirated university. The limited-edition Boxster Spyder might carry the torch with the 4.0-liter, with output somewhere around 430 hp. The Cayman GT4 could do the same. Or, who knows, an evolution of the 375-hp, 3.8-liter flat-six in the previous Boxster Spyder might burble out of left field. We expect to see the Boxster Spyder late this year. Until then, we'll wait to see what the merry-go-round says next time the Zuffenhausen horse comes around. Related Video: Featured Gallery Porsche 718 Boxster Spyder spy shots View 13 Photos News Source: Autocar via JalopnikImage Credit: CarPix Rumormill Pontiac Convertible Luxury Special and Limited Editions Performance porsche 911 gt3

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.