2000 Pontiac Grand Am Gt Sedan Chrome Rims Wheels ~ Sunroof Tinted Windows on 2040-cars

Auto blog

Porsche Boxster Spyder to get GT3's 4.0-liter flat six?

It's been a merry-go-round the past few months, the rumormill focused on what will power the next Porsche Boxster Spyder. First came hearsay of a flat-six going into the special edition of a model line known for its turbocharged four-cylinder engines. Then came tattling that the flat-six in question was the naturally aspirated, 4.0-liter from the 911 GT3. A couple of weeks ago we wrote " we'd be surprised if Porsche packed anything other than a turbocharged flat-four under the skin." But Autocar has a new report that, indeed, a downtuned version of the 500-horsepower 4.0-liter from the GT3's rump will move to the Boxster Spyder's midsection. The Autocar piece follows a Wheels magazine article from last November, and the prediction isn't outrageous. When Car and Driver reviewed the last Boxster Spyder, it wrote, "the hand-me-down six comes from the older 911 Carrera S, not to be confused with the new turbocharged 3.0-liter flat-six that powers the refreshed 911." If we can believe a recent report from Automobile about the 992-series 911 due later this year, the same thing is happening: The 991.2-series GT3 bequeaths its powerplant to the smaller sibling, and the 992-series GT3 moves to a 3.8-liter, twin-turbo flat-six with around 550 hp. Autocar quotes Andreas Preuninger, the Porsche engineer leading the development of all of these wunderkinds, saying of the Boxster earlier this year, "Natural aspiration is one of our main USPs. ... [We] think we can achieve throttle response and immediacy a little bit better with an atmospheric high-revving engine than any kind of turbo." We'll guess that means, by inference, that the GT3 is about to age out of naturally-aspirated university. The limited-edition Boxster Spyder might carry the torch with the 4.0-liter, with output somewhere around 430 hp. The Cayman GT4 could do the same. Or, who knows, an evolution of the 375-hp, 3.8-liter flat-six in the previous Boxster Spyder might burble out of left field. We expect to see the Boxster Spyder late this year. Until then, we'll wait to see what the merry-go-round says next time the Zuffenhausen horse comes around. Related Video: Featured Gallery Porsche 718 Boxster Spyder spy shots View 13 Photos News Source: Autocar via JalopnikImage Credit: CarPix Rumormill Pontiac Convertible Luxury Special and Limited Editions Performance porsche 911 gt3

Junkyard Gem: 1989 Pontiac Sunbird SE Coupe

General Motors built the fantastically successful J-Body cars starting at the dawn of the 1980s and continuing well into our current century, on five continents. The Pontiac Division's version of the J started out being called the J2000 and the 2000, then got the Sunbird name originally used on the Pontiac-ized Chevy Monza starting in 1983. Here's a once-slick-looking 1989 Sunbird SE Coupe, found at a Minneapolis-area boneyard way back in 2016. The best-known of all the J-Body cars, here, was the Chevrolet Cavalier, but Pontiac far outdid even the most blinged-up Cavalier Z24 when it came to elaborate taillights. Because this is Minnesota, the car is a patchwork of various layers of junkyard-obtained rusty body parts. One fender has TURBO badges from a Sunbird GT. The other side has the correct engine badges for this model. That engine is a 2.0-liter, single-overhead-cam straight-four from an engine family originally developed for the Opel Kadett D. This one was rated at 96 horsepower when new. This one has the automatic transmission, so it wouldn't have been very much fun to drive. Check out that cool parking brake handle, though! And, hey, is that a full can of Colorado Cool-Aid in the foot well? You'd think a proper Minnesota Pontiac would at least be full of Grain Belt cans. It appears that Higley Ford in Windom, Minn., had this car on the lot at some point. Windom is closer to Sioux Falls than to Minneapolis. This final mileage total looks good for a car living in Tinworm Country. Pontiac built this generation of Sunbird from the 1988 through 1994 model years, though it was really just a facelift of the first-generation cars. Starting in 1995, the Pontiac J-Body became the Sunfire, and production continued until the J platform itself got the axe in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In the 90s, fun will become the exclusive province of the rich. To which the Sunbird driver replies, "Bullish!" Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.