Base Coupe 5.7l Leather Cd 10 Speakers Am/fm Radio Radio Data System Abs Brakes on 2040-cars

Auto blog

Junkyard Gem: 1987 Pontiac Firebird

From 1967 through 2002, the Pontiac Division offered the Firebird, close sibling to the Chevrolet Camaro. By the third generation, which debuted for the 1982 model year, it became more difficult to tell the two F-body cars apart at a glance and the Pontiac-exclusive engines of the earlier years disappeared, but the Firebird still retained its own personality and its own position in the GM marketing hierarchy. I still find the occasional 1982-1992 Camaro as I search car graveyards for interesting stuff, but the corresponding Firebirds have become scarce in recent years. Here's a base-engine-equipped '87, its Bright Red paint (yes, that was the official name for the color) faded by the Colorado sun as it awaits the crusher. Firebird shoppers had their choice of three engines in 1987: A 5.7-liter Chevy V8 (210 hp), a 5.0-liter Chevy V8 (205 hp) and the same 2.8-liter 60° V6 that went into the Fiero and countless front-drive GM sedans (135 hp). This car has the base engine. The third-gen F-body didn't weigh much (3,105 pounds for the '87 with six-banger, about what a 2020 Corolla weighs), so 135 horses was tolerable. Plenty of these cars got T-5 5-speed manual transmissions, but this one got the two-pedal setup. Camaro wheels, of course. Our Friend the Carburetor didn't disappear from new cars until the early 1990s in the United States, though electronic fuel injection had become very commonplace by 1987. Still, GM considered this car's EFI worth a door-handle brag. It's not worth fixing up a mashed six-cylinder third-gen Firebird, so we can see the route this car took to its final parking space. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When you're about to be beaten to a pulp by catcalling, Olds-driving thugs, run to the Firebird! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much big hair in these late-1980s Pontiac ads! Featured Gallery Junked 1987 Pontiac Firebird View 24 Photos Auto News Pontiac Automotive History Coupe Firebird pontiac firebird Junkyard Gems

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.