2004 Pontiac Gto Coupe 2-door 5.7l Parts Salvage Repairable Wrecked No Title on 2040-cars

Auto blog

Junkyard Gem: 1992 Pontiac Firebird

Last spring, this series featured a 1992 Chevrolet Camaro RS in a Northern California junkyard, an example of the final model year for the highly successful third-generation GM F-Body. On a later visit to that yard, I spotted the Pontiac sibling to that car, a Firebird that was born the same year at the same Southern California factory. When the Chevrolet Division introduced the first Camaro as a 1967 model, the Pontiac Division got its own version of the F-Body called the Firebird. While the two cars were built on the same chassis and looked very similar, the first-generation Camaros got Chevrolet engines while their Firebird colleagues got Pontiac engines (including the innovative SOHC straight-six). The 1970-1981 second-generation Firebirds still had some Pontiac-only engines, but Chevrolet and Oldsmobile power crept under some hoods during that period. The third-generation Firebirds first appeared as 1982 models, and they drew from near-identical stockpiles of GM running gear (including the distinctly agricultural Iron Duke four-banger, which could be considered a Pontiac-derived engine). When the Camaro got the axe after 2002, the Firebird's neck was put on the same chopping block. When the Camaro returned for 2010, the Pontiac brand was sputtering to an agonized halt during its final year and there was no chance of the Firebird's return. This car is a fairly ordinary coupe, though it does have the mid-grade 205-horsepower 5.0-liter Chevrolet small-block V8 instead of the base 140-horse 3.1-liter V6. A 5.7-liter small-block was available as well. A five-speed manual transmission was base equipment, but few Americans wanted a three-pedal setup by the early 1990s. This car has the optional four-speed automatic. The MSRP with 5.0 engine, automatic transmission and air conditioning (which this car has) started at $14,304. That's about $31,868 in 2023 dollars. It was built at Van Nuys Assembly in the San Fernando Valley of Los Angeles County. By the dawn of the 1990s, the Camaros and Firebirds made at Van Nuys Assembly had become known as the worst-built GM cars made in North America, and the plant was shut down forever soon after this car was built. Today, a shopping mall lives where the factory once stood. This car managed to drive more than 150,000 miles during its life, so it beat the odds. The thrid-gen F-Body was pretty antiquated by the early 1990s, but the fourth-gen cars handled better and looked up-to-date for the era.

Win a sports car 2022 | The best giveaways this week

Autoblog may receive a share from purchases made via links on this page. Pricing and availability is subject to change. No donation or payment necessary to enter or win this sweepstakes. See official rules on Omaze. The feeling of getting a new car is wonderful. Winning that new car, or even better, your dream car, feels even better, or so we would imagine. And Omaze is here with a chance to experience that feeling. You’re probably asking yourself, what does it take to win? First of all, according to Omaze, "no donation or payment is necessary to enter or win this sweepstakes." $10 will get you 100 entries in this sweepstakes, while $50 will get you 1,000 entries and $100 will get you 2,000 entries. The best part? Each paid entry raises money for a worthy cause. See more about these causes at Omaze. Here are our favorite vehicle giveaways weÂ’ve found online this week. 2021 Ford Mustang Mach-E GT Performance Edition - Enter at Omaze Regardless of what you think about Ford using the name Mustang for an electric crossover, one thing is for certain, the Mustang Mach-E GT is an impressive piece of machinery. Here are some numbers for you: 480 horsepower, 634 lb-ft of torque, 0-60 in 3.5 seconds and 260 miles of range. Price? Well, thatÂ’s really up to you, because if you enter to win this Mach-E GT. it can be as low as $0. Here are the specs of the Mach-E in question, according to Omaze: Maximum Seating: 5 Engine: fully electric motors Drivetrain: eAWD Exterior Color: Rapid Red Metallic   Interior Color: Black Maximum Horsepower: 480 hp  Maximum Torque: 634 lb-ft Acceleration: 0-60 in 3.5 seconds Range: 235 miles Approximate Retail Value: $75,500 Cash Alt: $56,625 Special Features: GT Performance Edition; panoramic fixed-glass roof; Ford Co-Pilot360™ Active 2.0 and 360-degree camera; Brembo brakes; RTR Design Package including 20” RTR Aero 5 wheels, Nitto NT555 G2 tires and RTR Speed Block graphics Win a Restored 1969 Pontiac GTO - Enter at Omaze Joel Stocksdale, News Editor: There are an awful lot of ways to build a restomod. And a lot of those ways can be boring or tasteless. This one is neither. This is a seriously classy Pontiac GTO. Under the hood is a 461 cu. in. V8 from Butler Performance that's based on an actual Pontiac V8, not just another Chevy engine. The whole thing is subtle with a low-key metallic green and clean gray wheels. There isn't any overly flashy chrome or decals.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...