2004 Pontiac Gto 6 Speed Manual 2-door Coupe on 2040-cars

Auto blog

This 1988 Pontiac Grand Prix Daytona 500 pace car could be yours

Hopefully, the fans of GM's W-body '80s/'90s intermediates can forgive us, but we had pretty much forgotten — or had never really known — that one of the ways that era's Pontiac Grand Prix bathed itself in glory was by serving as the pace car for the Daytona 500. In fact, the Grand Prix paced NASCAR's marquee race every year from 1988 to 1992, and again in 1997, 1998, 2000 and 2003. That first year, 1988, the Grand Prix was all-new, making its debut on the W-body platform. It was also Motor Trend's car of the year. The 1988 Daytona 500 marked the 17th year in a row that a Pontiac was chosen to set the pace but the first time a front-wheel-drive car was so honored. The '88 Grand Prix followed a spate of Pontiac Trans Ams. This '88 Grand Prix, for sale right now on eBay Motors, is presented as an actual pace car, although fans could order a complete set of pace car decals for their very own GP. The pace car is based on that year's top-spec Grand Prix, the SE. In place of the standard car's 2.8-liter V6, however, the pace car uses a modified 3.1-liter V6, which is hooked to a five-speed manual transmission. This Grand Prix is otherwise largely standard fare excepting the roof-mounted light bar, the switches for which are located next to the radio. The mechanical odometer tucked into the digital instrument cluster shows just over 5,000 miles, and presumably, not all of them were acquired on the high-banked oval. With four days to go in the auction, bidding sits at $4,000 with the reserve unmet. Although the reserve is unknown, one clue is that this Grand Prix had been listed by a classic-car dealership in Pennsylvania for $18,500. Besides the debut of the W-body Grand Prix pace car, the 1988 race is also notable for its final lap: Bobby Allison held off his son, Davey Allison, to take the checkered flag, with the father-son duo enjoying a 1-2 finish. Now, who wants to re-live those Grand Prix glory days? Get on your Pontiac and ride!   This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Airbag recall adds 85k Pontiac Vibes to tally

The repairs needed for the faulty airbag inflators supplied by Takata continue to expand. Toyota initially announced a recall of 766,300 vehicles equipped with the bad part on June 11 as a followup to a campaign from 2013. Soon after, the National Highway Traffic Safety Administration opened a preliminary evaluation into five automakers who also used the component in their models. Now, NHTSA has released the official announcement of the latest Toyota recall listing 844,277 affected cars, including the newly added 2003-2004 Pontiac Vibe.
While NHTSA's document didn't include a model-by-model breakdown, General Motors spokesperson Alan Adler estimated to Autoblog that roughly 85,000 Vibes in the US would be covered under the latest recall. Like the rest of the affected models, the airbag inflator could rupture in a crash causing the bag not to work correctly, possibly spraying metal fragments at the occupant.
Toyota spokesperson Cindy Knight told Autoblog that the reason for the disparity between the earlier press release and NHTSA document was that Toyota was continuing to comb through VINs to create a list of affected vehicles. The original number was an estimate of that process at the time. Scroll down to the recall report from NHTSA.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado