1967 Pontiac Gto Base 6.6l on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Junkyard Gem: 1980 Pontiac Phoenix LJ Hatchback

The car-building world was rushing headlong into front-wheel-drive by the late 1970s, eager to reap the weight-saving and space-enhancing benefits of front-drive designs. General Motors designed an innovative FWD platform to replace the embarrassingly outdated Chevrolet Nova and its siblings, and that ended up being the Chevrolet Citation. The other US-market GM car divisions (except Cadillac) got a piece of the X-Body action, and the Pontiac version was called the Phoenix. Here's one of those first-year Phoenixes, not doing a very good job of rising from its snow-covered ashes in a Colorado self-service yard. Pontiac had used the Phoenix name on a luxed-up iteration of Pontiac's version of the Chevy Nova during the 1977-1979 model years, and so it made sense to apply that name to the Pontiac-ized Citation. Phoenix production continued through the 1984 model year (the Citation managed to hang on through 1985). Just to confuse everyone, the Nova name was revived in 1985, on a NUMMI-built Toyota Corolla. The LJ trim level was the nicest one for the 1980 Phoenix, and it included lots of trim upgrades and convenience features. However, even Phoenix LJ buyers had to pay extra for a three-speed automatic transmission instead of the base four-on-the-floor manual ($337, or about $1,291 in 2022 dollars). If you wanted air conditioning, that was another $564 and you had to get the $164 power steering and the $76 power brakes with it (total cost in 2022 dollars: $3,080). Affordable cars weren't so affordable back then, not once you started adding basic options. Both generations of the Phoenix had grilles influenced by those of the Pontiacs of earlier years. The base engine was the chugging 2.5-liter Iron Duke four-cylinder, but a 2.8-liter V6 was optional. This car has the V6, rated at 115 horsepower rather than the Duke's miserable 90 horses. The price tag: 225 bucks, or 862 inflation-adjusted 2022 bucks. The Phoenix was available just as a two-door coupe and five-door hatchback. The MSRP on this car would have started at $6,127, or around $23,469 now. That would have been a pretty good deal even after paying for the options, with the Phoenix's excellent mix of good interior space and solid fuel economy… but the Citation and its kin (the Oldsmobile Omega and Buick Skylark as well as the Phoenix) suffered from seemingly endless, highly publicized recalls and quality problems.