1965 Pontiac Gto 2d Coupe on 2040-cars

Auto blog

Fiero-based Zimmer Quicksilver was objectively terrible, but we'd totally drive it

Now here's something you don't see everyday. It's listed in our classified ads as a 1986 Pontiac Fiero, but as you can see, that description is a bit misleading. In fact, it's a Zimmer Quicksilver, which was indeed built atop the guts of a mid-engine Fiero coupe but was heavily modified by the Zimmer Motorcars Corporation at a facility in Pompano Beach, Florida. And the one you see here actually seems to be a pretty decent deal for a highly unusual car. We're not sure what was a more popular starting point for kit and custom cars in the 1980s and 1990s, but it would have to be either the Fiero or the vintage air-cooled Volkswagen Beetle. Fiero-based machines usually mimicked the design direction of any number of highly desirable Italian stallions, most commonly, we'd guess, the Lamborghini Countach. The Quicksilver is an altogether different animal, with over a foot of extra wheelbase added in front of the A-pillar to make for a dramatic, long and low silhouette that somehow still only has barely enough room for two passengers in its leather- and wood-lined interior. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. A stock 2.8-liter V6 engine from General Motors is mated to a three-speed automatic transmission that sends 140 horsepower and 170 pound-feet of torque to the rear wheels. Period road tests found the 0-60 run took a little over 10 seconds, which is terrible today but wasn't all that bad for the mid '80s. Best we can tell, only around 170 Quicksilvers were made between 1984 and 1988, which are, not coincidentally, the same years that Pontiac produced the Fiero. The 1986 Zimmer Quicksilver you see here is priced at $18,495 and shows well under 30,000 miles on the odometer. There aren't a lot of Zimmer Quicksilvers currently for sale for us to compare, but the ones we did find that had sold within the last few years suggest a little under $20,000 is a reasonable asking price. It could be a fun and offbeat addition to the garage, and if nothing else, you're not likely to see another one at your local car show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1980 Pontiac Phoenix LJ Hatchback

The car-building world was rushing headlong into front-wheel-drive by the late 1970s, eager to reap the weight-saving and space-enhancing benefits of front-drive designs. General Motors designed an innovative FWD platform to replace the embarrassingly outdated Chevrolet Nova and its siblings, and that ended up being the Chevrolet Citation. The other US-market GM car divisions (except Cadillac) got a piece of the X-Body action, and the Pontiac version was called the Phoenix. Here's one of those first-year Phoenixes, not doing a very good job of rising from its snow-covered ashes in a Colorado self-service yard. Pontiac had used the Phoenix name on a luxed-up iteration of Pontiac's version of the Chevy Nova during the 1977-1979 model years, and so it made sense to apply that name to the Pontiac-ized Citation. Phoenix production continued through the 1984 model year (the Citation managed to hang on through 1985). Just to confuse everyone, the Nova name was revived in 1985, on a NUMMI-built Toyota Corolla. The LJ trim level was the nicest one for the 1980 Phoenix, and it included lots of trim upgrades and convenience features. However, even Phoenix LJ buyers had to pay extra for a three-speed automatic transmission instead of the base four-on-the-floor manual ($337, or about $1,291 in 2022 dollars). If you wanted air conditioning, that was another $564 and you had to get the $164 power steering and the $76 power brakes with it (total cost in 2022 dollars: $3,080). Affordable cars weren't so affordable back then, not once you started adding basic options. Both generations of the Phoenix had grilles influenced by those of the Pontiacs of earlier years. The base engine was the chugging 2.5-liter Iron Duke four-cylinder, but a 2.8-liter V6 was optional. This car has the V6, rated at 115 horsepower rather than the Duke's miserable 90 horses. The price tag: 225 bucks, or 862 inflation-adjusted 2022 bucks. The Phoenix was available just as a two-door coupe and five-door hatchback. The MSRP on this car would have started at $6,127, or around $23,469 now. That would have been a pretty good deal even after paying for the options, with the Phoenix's excellent mix of good interior space and solid fuel economy… but the Citation and its kin (the Oldsmobile Omega and Buick Skylark as well as the Phoenix) suffered from seemingly endless, highly publicized recalls and quality problems.

Junkyard Gem: 1989 Pontiac 6000 STE AWD

During the middle to late 1980s, General Motors made a big push to grab back some of the sales swiped by makers of European luxury machinery during the previous decade. Around the top of the prestige pyramid, there was the Turin/Hamtramck-built Cadillac Allante taking aim at the Mercedes-Benz 560SEC and the super high-tech Buick Reatta trying to seduce away BMW and Jaguar shoppers; even the Riviera offered a futuristic touchscreen computer sorely lacking in anything out of Stuttgart or Bavaria. The General had a plan to take on the smaller German sporty sedans, too, and Pontiac of the "We Build Excitement" era offered a midsize sedan packed with modern hardware at a great price: the 6000 STE. Here's one of the rarest 6000 STEs of them all, an all-wheel-drive-equipped '89 found in a Denver-area yard last week. Any 6000 STE is extremely hard to find today; when I wrote about a front-wheel-drive 1987 6000 STE back in 2018, desperate owners of these cars filled my inbox with requests — sometimes demands —  for parts that continue to this day. Many of them pleaded with me to help them find an all-wheel-drive version, and now I have managed to find one at Colorado Auto & Parts in Englewood, just south of Denver (in fact, the same yard at which I shot the '87). You may recall CAP as the old-school yard whose owners built the amazing airplane-engined 1939 Plymouth pickup a few years back.  The all-wheel-drive system on the 6000 STE was introduced for the 1988 model year, and it became standard equipment on the 1989 STE. At this time, the automotive industry had taken note of the success of the idiot-proof all-wheel-drive systems offered by AMC and Audi/Volkswagen; Toyota began selling Americans all-wheel-drive Camrys, Celicas, and Corollas, while Ford offered the Tempo and Topaz with optional AWD and Subaru was just beginning to make the switch from manually-selected four-wheel-drive to genuine all-wheel-drive around that time (it took a few more years for everyone to standardize on the 4WD/AWD terminology we use today, though). The 6000 STE AWD was intended to compete with such all-wheel-drive-equipped sedans as the Audi 80 ($23,610), Audi 90 ($28,840), and BMW 325iX ($30,750); its $22,599 price tag (about $50,700 in 2021 dollars) certainly made it seem like a bargain compared to those cars. In addition to the all-wheel-drive system, 1989 6000 STE owners got a digital instrument panel and more switches and buttons than the Space Shuttle.