We Finance! 2008 Pontiac G6 Gt - Fwd Power Sunroof A/c Remote Keyless Entry on 2040-cars

Auto blog

What car brand should come back?

Congratulations, wishful thinker! You've been granted one wish by the automotive genie or wizard or leprechaun or whoever has been gifted with that magical ability. You get to pick one expired, retired or fired automotive brand and resurrect it from its heavenly peace! But which one? That's a tough decision and not one to be made lightly. As we know from car history, the landscape is littered with failed brands that just didn't have what it took to cut it in the dog-eat-dog world of vehicle design, engineering and marketing. So many to choose from! Because I am not a car historian, I'll leave it to a real expert to present a complete list of history's automotive misses from which you can choose, if you're a stickler about that sort of thing. And since I'm most familiar with post-World War II cars and brands, that's what I'm going to stick to (although Maxwell, Cord and some others could make strong arguments). So, with the parameters established, let's get started, shall we? Hudson: I admit, I really don't know a lot about Hudson, except that stock car drivers apparently did pretty well with them back in the day, and Paul Newman played one in the first Cars movie. But really, isn't that enough to warrant consideration? Frankly, I think the Paul Newman connection is reason enough. What other actor who drove race cars was cooler? James Dean? Steve McQueen? James Garner? Paul Walker? But, I digress. That's a story for another day. Plymouth: As the scion of a Dodge family (my grandfather had a Dodge truck, and my mom had not one, but two Dodge Darts – the rear-wheel-drive ones with slant sixes in them, not the other one they don't make any more), I tend to think of Plymouth as the "poor man's Dodge." But then you have to consider the many Hemi-powered muscle cars sold under the Plymouth brand, such as the Road Runner, the GTX, the Barracuda, and so on. Was there a more affordable muscle car than Plymouth? When you place it in the context of "affordable muscle," Plymouth makes a pretty strong argument for reanimation. Oldsmobile: When I was a teenager, all the cool kids had Oldsmobile Cutlasses, the downsized ones that came out in 1978. At one point, the Olds Cutlass was the hottest selling car in the land, if you can believe that. Then everybody started buying Honda Civics and Accords and Toyota Corollas and Camrys, and you know the rest. But going back farther, there's the 442 – perhaps Olds' finest hour when it came to muscle cars.

Junkyard Gem: 1996 Pontiac Grand Am SE Coupe

The Grand Am was the best-selling Pontiac model in the United States for every year of the 1990s, and it outsold most of its N-Body platform-mates (including the Chevrolet Corsica/Beretta) during nearly all of that decade. A sporty-looking compact with two or four doors, the Grand Am offered true 1990s radness—and, in some cases, respectable performance — at a good price. Today's Junkyard Gem is a nicely preserved example of the facelifted 1996 Grand Am, found in a Denver-area car graveyard. This is an SE Coupe with base engine and transmission, the most affordable Grand Am available in 1996. List price was $13,499, or about $26,523 in 2023 dollars. The factory-issued Monroney sheet for this car was still inside, so we can see that the original buyer got the car at Bob Ruwart Motors in Wheatland, Wyoming (about 175 miles up I-25 from this Pontiac's final parking spot), and paid a total of $16,054 ($31,543 in today's money) after the cost of options and the destination charge. The '96 Grand AM SE buyer had to pay extra for cruise control, air conditioning, power windows, rear glass defogger and other features we now take for granted on new cars. The base engine was the 2.4-liter Twin Cam four cylinder, a member of the screaming Oldsmobile Quad 4 family. This one was rated at 150 horsepower and 155 pound-feet. A 3.1-liter V6 with 155 horses and 185 pound-feet was an option. If you got the V6 in your '96 Grand Am, however, you couldn't get a manual transmission. This car has a proper five-speed manual, which made for fun driving with the high-revving Twin Cam engine in a machine weighing just 2,802 pounds (which is quite a bit less than what the current Honda Civic weighs). It traveled just over 160,000 miles during its 27 years on the road. The body and interior were still in fairly good condition when the car arrived here, so we can assume that some expensive mechanical problem doomed this car. Perhaps the original clutch wore out and the owner didn't consider it worth replacing. After all, a mid-1990s Detroit two-door with a transmission most people can't drive isn't worth much these days. Though nobody knew it when this car was new, the Grand Am would be gone in nine years and Pontiac itself would get the axe five years after that. It makes the ordinary extraordinary. Husbands and wives would argue for 12 hours over who got to drive the Grand Am, if we are to believe this ad. Proud sponsor of the 1996 Olympic team.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...