4 Dr Sedan Automatic Gasoline 2.4l L4 Mpi Dohc 16v on 2040-cars

Auto blog

Toyota urges owners of old Corolla, Matrix and RAV4 models to park them until airbags are replaced

DETROIT — Toyota and General Motors are telling the owners of about 61,000 older Corolla, RAV4, Matrix/ Pontiac Vibe models to stop driving them because their Takata airbag inflators are at risk of exploding and hurling shrapnel. The urgent warning Monday covers: Certain Corolla compact cars and Matrix hatchbacks from the 2003 and 2004 model years. RAV4 small SUVs from 2004 and 2005. Also covered are about 11,000 Pontiac Vibes from 2003 and 2004, which are essentially the same as the Matrix and were made at the same California factory. Most of the vehicles are in the U.S. “If the airbag deploys, a part inside is more likely to explode and shoot sharp metal fragments, which could cause serious injury or death to the driver or passengers,” Toyota said in a statement. Owners can go to nhtsa.gov/recalls and enter their 17-digit vehicle identification number to see if their cars are affected. If you're not the original owner of the vehicle, the manufacturer's recall letter might not reach you, so be sure to do the VIN check. The recalled RAV4s have Takata driver's airbags while the Corolla and Matrix models have them on the passenger side. The Corolla and Matrix also are under a separate recall because their airbags can be deployed without a crash, the company said. Both companies said owners should contact a local dealer instead of driving the cars in for repairs. Dealers will provide options such as mobile repair, towing the car to a dealer, or vehicle pickup and delivery. Takata used volatile ammonium nitrate to create a small explosion to inflate airbags in a crash. But the chemical propellant can deteriorate over time when exposed to high temperatures and humidity. It can explode with too much force, blowing apart a metal canister and spewing shrapnel. At least 26 people have been killed in the U.S. by Takata inflators since May 2009, and at least 30 have died worldwide including people in Malaysia and Australia. In addition, about 400 people have been injured. The exploding airbags sent Takata of Japan into bankruptcy. The potential for a dangerous malfunction led to the largest series of auto recalls in U.S. history. About 100 million inflators were recalled worldwide. Recalls Pontiac Toyota Takata airbag recall

Junkyard Gem: 2001 Pontiac Grand Prix GTP

John DeLorean began his career working on Packard's Ultramatic Twin transmission, but he made his greatest mark on the automotive industry during his 1956-1969 tenure at GM's Pontiac Division. There, he helped develop the first production car engine with a quiet timing belt instead of a noisy chain, among other engineering feats, but his real fame came from the development of two money-printing models based more on marketing than machinery: the GTO and the Grand Prix. While the GTO gets all the attention now, the Grand Prix set the standard for the big-selling personal luxury coupes that sold like mad for decades to come. Today's Junkyard Gem is an example of the most powerful Grand Prix available at the turn of the century, found in a Denver-area self-service yard during the summer. The Grand Prix got front-wheel-drive for 1988 and a sedan version for 1990, but then something very beneficial happened in the 1997 model year: supercharging! Various flavors of the venerable 3.8-liter Buick V6 engine (itself based on the early-1960s Buick 215 V8 and thus cousin to the Rover V8) received Eaton blowers, starting in the 1992 model year. The Grand Prix didn't get its introduction to forced induction until the 1997 model year, but it kept the boosted option until the final Grand Prix rolled off the line in 2008 (the final Pontiac followed within a couple of years). This one made 240 horsepower, making it King of Grand Prix engines until the 2005 model year (when the GXP and its 303-horse V8 engine showed up). The very last year for a Grand Prix with a manual transmission was 1993 (there had been a three-pedal Grand Prix drought from 1973 through 1988, just to put things in perspective), so this car has the mandatory four-speed automatic. The Grand Prix lived on GM's W platform for its last two decades, making it sibling to the Impala, Regal, and Intrigue in 2001. Until the 2004 model year, every W-Body Grand Prix was built at Fairfax Assembly in Kansas City (no, the other Kansas City). Production of the final generation of Grand Prix took place in Ontario. It seems fitting that this car's final pre-crusher parking spot would be between two other GM products of the same era: a Monte Carlo and a Vibe. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...