2008 Pontiac G8 Gt Premium 6.0l V8 Heated Leather 60k Texas Direct Auto on 2040-cars

Auto blog

2008-2009 Pontiac G8 recalled over airbag concern

General Motors is recalling around 38,000 Pontiac G8 sedans from its 2008 and 2009 model years. The National Highway Traffic Safety Administration reports that the cars may have a passenger-side airbag flaw that might prevent proper deployment in certain scenarios.
According to NHTSA, the airbag might not adequately protect a fifth percentile woman - that is, a woman around four-foot, 11-inches weighing 108 pounds. The New York Times indicates that the anomaly was found during a crash test conducted by GM's Australian branch, Holden, which was testing the G8's twin (read: Commodore) for head injuries. According to that report, the test in question is specifically tailored to simulate injuries to females, so the results do not apply to men or children.
The issue has been blamed on a seat position sensor that governs airbag deployment rates. NHTSA indicates that when the front passenger seat is moved all the way forward, the faulty sensor may inappropriately trigger a 30-millisecond delay between airbag stages, potentially leading to greater injuries.

Another Burt Reynolds Trans Am is up for auction

Fans of Smokey and the Bandit, your car has arrived. This Saturday, January 21, Barrett-Jackson will auction a 1977 Pontiac Trans Am clone that, while not originally in the movie, was owned and signed by the Bandit himself, Burt Reynolds. Not only that, but it packs many modifications that should make this Pontiac drive the way we all imagined it did. This is a Trans Am clone, not an original. The car was built by Nebraska company Restore A Muscle Car, and started life as a lowly Firebird Formula. However, the company brought it up to Trans Am grade and beyond. Under the hood is a fuel-injected 8.2-liter V8 from Butler Performance that Restore A Muscle Car says produces 600 horsepower. Coupled to the big V8 is a Tremec five-speed manual transmission. There's even Hurst line-lock on-board, so this Trans Am should be perfect for on-demand burnouts. The car also comes with QA1 coil-over suspension, so it should corner better than the original, too. The outside looks roughly like a stock Trans Am, but it now has 18-inch wheels styled after those from the movie car, and the shaker scoop says "8.2" on each side. View 5 Photos In 2014, a 1977 Trans Am owned by Reynolds sold for a whopping $450,000. That car wasn't an actual movie car either, and lacked the modifications of this one. However, it was used as a promotional car and was given to Reynolds, so it did have some history with the film. This upgraded car is listed in the Barrett-Jackson catalog as "no reserve," so it's going home with a new owner on Saturday, regardless of price. Related Video:

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...