81 Original Pontiac Firebird Trans Am 4.9 Automatic Restoration Project on 2040-cars

Auto blog

Junkyard Gem: 1991 Pontiac Grand Am LE with Quad 4 Engine

GM introduced the N-Body compact platform with the Oldsmobile Calais and Pontiac Grand Am for the 1985 model year and continued building N-based cars through 1998. Most of these cars weren't interesting from an enthusiast standpoint, but a handful rolled off the assembly line with raucous DOHC Oldsmobile Quad 4 engines and manual transmissions, and those cars were plenty of fun. Here's a 1991 Grand Am with that rare setup, photographed in a self-service yard in California's Central Valley. The base engine in the 1991 Grand Am was the 110-horsepower, 2.5-liter pushrod Iron Duke, an engine that might have been fine on a Romanian tractor in 1953 but had no place on an American street car as the 21st century approached. Fortunately, GM started bolting the modern 2.3-liter DOHC Quad 4 engine into 1988 cars, and this was a proper four-cylinder. The Quad 4 ran a little rough and uncivilized, and it had its share of reliability problems, but you could rev the piss out of it and it made good power. In 1991, this engine was rated at 180 hp. That made this 2,592-pound sedan pretty quick. Unfortunately, the slushboxization of America had progressed with depressing rapidity during the 1980s, and by 1991 most Grand Am buyers — even the ones who opted for the Quad 4 — chose the automatic transmission. That didn't happen with this car, though — it boasts a rugged Getrag 5-speed instead of the happiness-amputating three-speed automatic. Yes, that's the kind of odometer reading you'd expect to see on an Accord or Maxima from this era. Someone loved this car and took care of it. Here we see an interesting mix of 1980s and 1990s car-radio technology. CD players in cars were still costly luxury items in 1991, seldom seen in affordable cars like the Grand Am, while 1980s-style slider-style EQ controls were on the way out. This Delco unit straddles both decades nicely. I seek out Quad 4-equipped cars during my junkyard travels, and I have photographed quite a few: this '89 Cutlass Calais, this '90 Cutlass Calais, this '90 Grand Am, this '91 Quad 442, this '93 Achieva SCX, and this '98 Cavalier Z24. It's a shame that Buick never put the Quad 4 in the Reatta, which was a fine car ruined by a somnolent and obsolete V6. The music in this ad is even more early-1990s than Crystal Pepsi. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

How to turn a Pontiac Fiero into a trackday car

Imagine hitting the track in a mid-engine, rear-wheel drive sports coupe that's affordable and has pretty good parts availability. It might sound like a pipe dream, but it's actually quite possible, if you're willing to think a little outside the box. The Pontiac Fiero is out there just waiting for a little work to turn it into a competent racing machine.
Think about it for a second. Of course, we would all like to be snaking through the curves in something exotic, but what happens when you crash or something breaks? The bills are going to mount up quickly. However, if you ball up a Fiero at the track, as long as you're not hurt, then it's not a huge tragedy.
That's basically the story of Steven Snyder in a new video from Drive starring Matt Farah. Snyder wanted to go to the track cheaply and ended up with an awesome little Fiero with a huge wing and a claimed 220 horsepower at the wheels thanks to a V6 from a Chevrolet Lumina. Check out the video to see how this pint-size Pontiac performs.