78 Firebird Esprit-no Reserve on 2040-cars

Auto blog

Junkyard Gem: 1988 Pontiac 6000 LE Safari Wagon

The Detroit station wagon was fast losing sales to minivans and trucks as the decade of the 1980s progressed, but Pontiac shoppers still had plenty of choices as late as the 1988 model year. A visit to a Pontiac dealership in 1988 would have presented you with three sizes of wagon, from the little Sunbird through the midsize 6000 and up to the mighty Parisienne-based Safari. Today's Junkyard Gem is a luxed-up 6000 LE, complete with "wood" paneling, found in a car graveyard in Fargo, North Dakota. Confusingly, the "Safari" name in 1988 was used by Pontiac to designate both a specific model — the wagon version of the Parisienne/Bonneville— and as the traditional Pontiac designation for a station wagon. That meant that the wagon we're looking at now was a Safari but not the Safari in the 1988 Pontiac universe. The 6000 lived on the GM A-Body platform, as the Pontiac-badged version of the Chevrolet Celebrity. Production ran from the 1982 through 1991 model years, with the A-Body Buick Century surviving all the way through 1996. The LE trim level came between the base 6000 and the gloriously complex 6000 STE (which wasn't available in wagon form, sadly). I visited this yard in Fargo after judging at the Minneapolis 500 24 Hours of Lemons in Brainerd, Minnesota, last fall. Up to that point, I had visited 47 of the Lower 48 United States, with just North Dakota remaining, so I made a point of doing a Fargo detour in order to check that state off my list. I'm pleased that I found such a good example of the 1982-1996 GM A-Body in this yard, because the most famous of all the A-Bodies is the 1987 Oldsmobile Cutlass Ciera driven to Brainerd by the inept Fargo-based kidnappers in the film "Fargo." This Minnesota-plated 6000 had some rust, but just negligible levels by Upper Midwestern standards on a 31-year-old car. The interior looked very good, with the original owner's manual still inside. The 6000 LE boasted "redesigned contoured seats and London/Empress fabric," which sounds pretty swanky. Something less swanky lives under the hood: an Iron Duke 2.5-liter pushrod four-cylinder engine, known as the Tech 4 by 1988. The Iron Duke was, at heart, one cylinder bank of the not-quite-renowned Pontiac 301-cubic-inch V8; while fairly rugged, the Duke ran rough (typical of large-displacement straight-four engines) and made just 98 horsepower in this application. Pontiac offered a couple of optional V6s in the 6000 in 1988, but no Quad 4.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Online Find: 1970 Pontiac Firebird Concept, cousin of the Weinermobile

So there's this for sale over at Hemmings: the 1970 Pontiac Firebird One concept designed by Harry Bentley Bradley and built by Dave Crook. For sale at the time of writing in Bellevue, Washington for $94,950, most of the seller's description appears to be pulled from a 2001 Barrett-Jackson listing, when the car was sold at auction for $61,600. Before we get to the car, it helps to know the man behind it: Bradley was a designer at General Motors from 1962 to 1966 who, against company policy, continued to submit designs to Hot Rod magazine under an assumed name. Mattel poached him in 1966 to design its brand new toy line called Hot Wheels, and Bradley designed all of them except one. He only stayed at Mattel for a year because he didn't think Hot Wheels would be successful, then left to start his own design company. Among other works, he penned the most recent example of the Oscar Mayer Wienermobile. Now can you see the Firebird One's design language? Since it apparently has a letter of documentation from GM design staff, we'll assume that GM asked the then-freelancing Bradley to work some magic on its muscle car, this being the totally Hot-Wheels influenced result. There are 17,456 miles on its 255-horsepower, 350 cubic-inch V8. The interior has tan leather, custom bucket seats, a wood grain dash, and one of the most awkward spare tire placements ever. The seller assures all prospective buyers that it is, like the Death Star, "fully operational."