1979 Pontiac Firebird on 2040-cars

Auto blog

Pontiac and McLaren once hooked up, and it was rad

Most of us would bend over backwards to have a chance to own a McLaren car, but few can afford such extravagance. That said, there’s a way you can get behind the wheel of a legitimate McLaren without breaking the bank. For 1989 and 1990, the Pontiac Grand Prix was offered in a limited-edition ASC-McLaren variant that featured tuning and updates from the iconic British automaker. Examples of this rare coupe rarely surface for sale, so itÂ’s surprising to see this low-mile 1990 Pontiac Grand Prix ASC-McLaren on eBay. The car is the result of a partnership between American Specialty Cars-McLaren (ASC-McLaren) and Pontiac. WeÂ’re not talking about the McLaren Formula 1 team or even the iconic McLaren road cars here. The McLaren connection comes from an arm of the automakerÂ’s powertrain engineering department. The Grand PrixÂ’s standard 3,1-liter V6 got a massage and a turbocharger, adding 65 horsepower for a total of 205 ponies and 225 pound-feet of torque. A four-speed automatic transmission sends power to the front wheels. That output is modest by todayÂ’s standards, and it wasnÂ’t outrageous even by 1990 standards, but the car returned a decent 0-60 mph time of around 7 seconds. The $5,000 ASC-McLaren package added a load of cool 1980s tech to the Grand PrixÂ’s interior, some of which is surprisingly advanced for the time. The car got a head-up display and a digital display on the dash. The steering wheel should be delightfully familiar to anyone who remembers a top-end Pontiac of the era, with the entire center of the wheel filled with buttons instead of the airbags we see today. The car had insanely padded bucket seats front and rear(!) with a distinctive pear shape.  Many sources peg production numbers between 2,500 and 3,500 units, so the car is relatively rare compared to its mass-produced Pontiac counterparts. This oneÂ’s got just 17,746 miles on the clock, too, and appears to be in excellent condition. ItÂ’s had just two owners and no reported accidents. The seller notes a little surface rust from the car being in storage so long. This era of GM cars tended to deteriorate quickly, so a bit of surface rust shouldnÂ’t be a huge issue. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2008-2009 Pontiac G8 recalled over airbag concern

General Motors is recalling around 38,000 Pontiac G8 sedans from its 2008 and 2009 model years. The National Highway Traffic Safety Administration reports that the cars may have a passenger-side airbag flaw that might prevent proper deployment in certain scenarios.
According to NHTSA, the airbag might not adequately protect a fifth percentile woman - that is, a woman around four-foot, 11-inches weighing 108 pounds. The New York Times indicates that the anomaly was found during a crash test conducted by GM's Australian branch, Holden, which was testing the G8's twin (read: Commodore) for head injuries. According to that report, the test in question is specifically tailored to simulate injuries to females, so the results do not apply to men or children.
The issue has been blamed on a seat position sensor that governs airbag deployment rates. NHTSA indicates that when the front passenger seat is moved all the way forward, the faulty sensor may inappropriately trigger a 30-millisecond delay between airbag stages, potentially leading to greater injuries.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...