1968 Pontiac Firebird on 2040-cars

Auto blog

'67 Chevy Corvair convertible vs. '86 Pontiac Fiero in cult classic showdown

Every few a decades, the folks running General Motors lose their minds briefly try to market a car that public doesn't see coming and often aren't ready for. In the '60s there was the rear-engine, air-cooled Chevrolet Corvair, then the mid-engine Pontiac Fiero in the '80s and the completely bizarre Chevy SSR in the 2000s. What all of these had in common was that they bucked the trend for American models of their era, for better or worse. The latest episode of Generation Gap tasked the hosts with finding two cult classic vehicles to choose between; they came come up with two of these quirky products from The General.
On the classic side, there's a 1967 Chevy Corvair Monza convertible. Being from later in the production run, it wears slightly more aerodynamic styling than the earlier, boxier examples. Hanging out back is an air-cooled, 2.7-liter flat-six pumping out a robust 95 horsepower. In the other corner is the somewhat more modern 1986 Pontiac Fiero SE with a mid-mounted, 2.5-liter "Iron Duke" four-cylinder, an engine nearly ubiquitous in GM cars of the '80s.
Judging by when they were new, the Corvair was far more successful than the Fiero with over 1.8 million sold. Of course, Ralph Nader's book Unsafe at Any Speed kind of poisoned the well, even if the poor safety reputation wasn't entirely deserved. The Fiero on the other hand only lasted for a few model years before shuffling off, but it eventually got its own performance boost with the V6 version and rather attractive GT models. Check them both out in the video and tell us in Comments which you want in your garage.

Junkyard Gem: 1992 Pontiac Firebird

Last spring, this series featured a 1992 Chevrolet Camaro RS in a Northern California junkyard, an example of the final model year for the highly successful third-generation GM F-Body. On a later visit to that yard, I spotted the Pontiac sibling to that car, a Firebird that was born the same year at the same Southern California factory. When the Chevrolet Division introduced the first Camaro as a 1967 model, the Pontiac Division got its own version of the F-Body called the Firebird. While the two cars were built on the same chassis and looked very similar, the first-generation Camaros got Chevrolet engines while their Firebird colleagues got Pontiac engines (including the innovative SOHC straight-six). The 1970-1981 second-generation Firebirds still had some Pontiac-only engines, but Chevrolet and Oldsmobile power crept under some hoods during that period. The third-generation Firebirds first appeared as 1982 models, and they drew from near-identical stockpiles of GM running gear (including the distinctly agricultural Iron Duke four-banger, which could be considered a Pontiac-derived engine). When the Camaro got the axe after 2002, the Firebird's neck was put on the same chopping block. When the Camaro returned for 2010, the Pontiac brand was sputtering to an agonized halt during its final year and there was no chance of the Firebird's return. This car is a fairly ordinary coupe, though it does have the mid-grade 205-horsepower 5.0-liter Chevrolet small-block V8 instead of the base 140-horse 3.1-liter V6. A 5.7-liter small-block was available as well. A five-speed manual transmission was base equipment, but few Americans wanted a three-pedal setup by the early 1990s. This car has the optional four-speed automatic. The MSRP with 5.0 engine, automatic transmission and air conditioning (which this car has) started at $14,304. That's about $31,868 in 2023 dollars. It was built at Van Nuys Assembly in the San Fernando Valley of Los Angeles County. By the dawn of the 1990s, the Camaros and Firebirds made at Van Nuys Assembly had become known as the worst-built GM cars made in North America, and the plant was shut down forever soon after this car was built. Today, a shopping mall lives where the factory once stood. This car managed to drive more than 150,000 miles during its life, so it beat the odds. The thrid-gen F-Body was pretty antiquated by the early 1990s, but the fourth-gen cars handled better and looked up-to-date for the era.

How to turn a Pontiac Fiero into a trackday car

Imagine hitting the track in a mid-engine, rear-wheel drive sports coupe that's affordable and has pretty good parts availability. It might sound like a pipe dream, but it's actually quite possible, if you're willing to think a little outside the box. The Pontiac Fiero is out there just waiting for a little work to turn it into a competent racing machine.
Think about it for a second. Of course, we would all like to be snaking through the curves in something exotic, but what happens when you crash or something breaks? The bills are going to mount up quickly. However, if you ball up a Fiero at the track, as long as you're not hurt, then it's not a huge tragedy.
That's basically the story of Steven Snyder in a new video from Drive starring Matt Farah. Snyder wanted to go to the track cheaply and ended up with an awesome little Fiero with a huge wing and a claimed 220 horsepower at the wheels thanks to a V6 from a Chevrolet Lumina. Check out the video to see how this pint-size Pontiac performs.