on 2040-cars

Auto blog

Junkyard Gem: 1980 Pontiac Grand Prix LJ

A couple of years before John DeLorean and his team at the Pontiac Division created the GTO by pasting a big engine and some gingerbread on the LeMans, they created a rakish, powerful coupe based on the staid full-size Catalina. This was the 1962 Pontiac Grand Prix, which sold like crazy and escalated the personal luxury coupe war already brewing in Detroit. Starting with the 1969 model year, the Grand Prix switched to a smaller chassis (shared the following year with the new Chevrolet Monte Carlo), and all subsequent rear-wheel-drive Grand Prix (that is, through 1987) remained siblings of the Monte. Today's Junkyard Gem is a rare 1980 Grand Prix LJ, found in a self-service yard near Reno, Nevada. Sure, a fresh round of Middle East conflict had put a kink in America's fuel hose in 1979, leading to gas lines and a general sense of malaise, but at least the new Grand Prix looked extra sharp for 1980. The LJ package came with all sorts of appearance and comfort goodies, including these "luxury seats with loose-pillow design in New Florentine Cloth." A Pontiac Phoenix LJ was available as well. These seats must have been very comfortable when new. Who needed a Cadillac when Pontiac would sell you this car at a base MSRP of just $7,000 (about $26,704 in 2023 dollars)? That price was what you paid if you were willing to get the base 3.8-liter Buick V6, though. To get a V8 engine with four-barrel carburetor, you had to pay extra. If you did pay the extra for a V8, which one you got depended on which state you lived in; in California, you got this 305-cubic-inch (5.0-liter Chevrolet small-block), and in the other 49 states you got a 301-cubic-inch (4.9-liter) Pontiac. The 305 was rated at 150 horsepower with 230 pound-feet; the 301 made 140hp and 240 lb-ft. This car was originally bought in California (the state line is about ten miles away from its final parking spot), so it has the Chevy engine. The V8 added $195 (plus $250 for the California-only emissions system) to the out-the-door price of the car, or about $1,316 in 2023 dollars. Outside of California, a 4.3-liter Chevy V6 was available for just 80 additional bucks ($305 now). All 1980 Grand Prix got a three-speed automatic transmission as standard equipment, with no manual available from the factory. This car has the optional air conditioning, which cost $601 ($2,293 after inflation). This is the "Custom Sport" steering wheel, which was standard on the LJ. The tilt option cost $81 ($309 today).

World's only 1964 Pontiac XP-833 Banshee coupe for sale by Kia dealer

It seems like there has been a spate of especially odd car sales in the first part of this especially odd year, from the numerous barn finds and homebrew specials to the time capsule cars — like the BMW wrapped in a protective bubble for 23 years. Napoli Kia in Milford, Connecticut, brings us another, via Motor1. Len Napoli is the dealership principal and die-hard Pontiac maven; his father opened Napoli Pontiac in 1958, and Len held onto the franchise until the early 2000s, just before GM shuttered the brand that built excitement. Napoli got hold of the 1964 Pontiac Banshee XP-833 coupe concept, and put the car up for sale through his Kia dealership for $750,000. The exceptional price comes from the fact that Pontiac built two Banshee concepts in 1964, one this silver coupe with a red interior, the other a white roadster, making each concept a one-of-one collector car.      Motor Trend wrote a detailed piece on this one in 2013, the editorial tour hosted by Bill Collins, the Banshee's lead engineer. The short story is that GM exec John Z. DeLorean — yes, him —  gave approval to a small crew at Pontiac to create a two-seater sports car to compete with the Mustang, because GM had nothing to fend off the four-seat coupe that would sell one million units in just 18 months on the market. Collins and his team took inspiration from the 1963 Corvair Monza GT concept, working up a fiberglass body over a steel frame, with a 230-cubic-inch overhead-cam straight-six producing 165 horsepower and 216 pound-feet of torque, a four-speed manual transmission, and 9.5-inch drum brakes at all corners. The idea was that the XP-833 would be "an affordable and fun two-seat sports car," the concept demonstrating the base-model price leader offering a lengthy list of options for those who wanted more. The white roadster, in fact, fitted a 326 cubic-inch V8 under the hood. Rumor says that Chevrolet execs didn't like having another two-seater sports car in the GM fold, especially one with a fiberglass body that held weight down to 2,200 pounds. GM execs took one look at the two concepts in 1965 and shut the project down. The two XP-833s lived in a garage for years, Collins and his colleague Bill Killen getting permission to buy the cars from GM in 1973 before Collins left to help engineer the DeLorean DMC-12. It wasn't until just before Collins departed that the XP-333 got the name Banshee.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...