1986 Pontiac Bonneville Police Smokey And The Bandit 3 on 2040-cars

Auto blog

Junkyard Gem: 1987 Pontiac Firebird

From 1967 through 2002, the Pontiac Division offered the Firebird, close sibling to the Chevrolet Camaro. By the third generation, which debuted for the 1982 model year, it became more difficult to tell the two F-body cars apart at a glance and the Pontiac-exclusive engines of the earlier years disappeared, but the Firebird still retained its own personality and its own position in the GM marketing hierarchy. I still find the occasional 1982-1992 Camaro as I search car graveyards for interesting stuff, but the corresponding Firebirds have become scarce in recent years. Here's a base-engine-equipped '87, its Bright Red paint (yes, that was the official name for the color) faded by the Colorado sun as it awaits the crusher. Firebird shoppers had their choice of three engines in 1987: A 5.7-liter Chevy V8 (210 hp), a 5.0-liter Chevy V8 (205 hp) and the same 2.8-liter 60° V6 that went into the Fiero and countless front-drive GM sedans (135 hp). This car has the base engine. The third-gen F-body didn't weigh much (3,105 pounds for the '87 with six-banger, about what a 2020 Corolla weighs), so 135 horses was tolerable. Plenty of these cars got T-5 5-speed manual transmissions, but this one got the two-pedal setup. Camaro wheels, of course. Our Friend the Carburetor didn't disappear from new cars until the early 1990s in the United States, though electronic fuel injection had become very commonplace by 1987. Still, GM considered this car's EFI worth a door-handle brag. It's not worth fixing up a mashed six-cylinder third-gen Firebird, so we can see the route this car took to its final parking space. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When you're about to be beaten to a pulp by catcalling, Olds-driving thugs, run to the Firebird! This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. So much big hair in these late-1980s Pontiac ads! Featured Gallery Junked 1987 Pontiac Firebird View 24 Photos Auto News Pontiac Automotive History Coupe Firebird pontiac firebird Junkyard Gems

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.