Find or Sell Used Cars, Trucks, and SUVs in USA

1968 Plymouth Fury Iii Base 6.3l Commando 383 Nice Daily Driver on 2040-cars

Year:1968 Mileage:103000 Color: Green /
 Green
Location:

Kansas City, Missouri, United States

Kansas City, Missouri, United States
Transmission:Automatic
Body Type:U/K
Engine:6.3L 383Cu. In. V8 GAS Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Private Seller
Year: 1968
Number of Cylinders: 8
Make: Plymouth
Model: Fury III
Trim: Base
Warranty: Vehicle does NOT have an existing warranty
Drive Type: U/K
Power Options: Air Conditioning
Mileage: 103,000
Exterior Color: Green
Interior Color: Green
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"Interior is in GREAT shapeRuns GREAT no concernsClock does not workFuel gauge is not registeringA/C blows, but not cold (freon)Small rust spot under the passenger side vinyl (see pic)"

I sold all my cars recently and have been driving my Fury III as my daily driver.

As you can imagine the gas is killing me. But still love this ole car. She drives like a dream and she is fast.

Everyone is always giving me a thumbs up or rolling down their windows to express there pleasure. This morning on the way to work a gentlemen stopped beside me at a red light and he rolled down his window on the passenger side where is son (looked to be about 9yrs old) sat, and said "I love it!!!, my first car was a Fury III just like that, but a 4 door." Makes you feel good about driving it and letting others reminisce.

Back to the CAR-

Car is great condition to be 45 years old

103,000 original miles on the commando 383 engine

I will miss the rumble of the engine and people turning there heads and smiling.

Thanks for looking, hope you are the lucky winner of this wonder car.

Guaranteed to have fun and love this ride

During the muscle car era, auto manufacturers were busy cranking out big-block-powered intermediates in an effort to keep up with the purchasing power of performance-minded youth, but the family man was seemingly lost in the shuffle. At least, that's what most books written today would have you believe. Truth be told, full-size cars were leaving the assembly line in an ever-moving conga line just as quickly.

One such popular full-size automobile was the Plymouth Fury III. It was positioned in the middle of the C-body luxury platform, which also included the Sport Fury and upscale VIP models. Offered with several power options, the Fury III takes a very distant back seat to its muscle car brethren today; in many cases, its affordability lands it safely in the under-$15,000 bracket. Did your wallet perk up at that thought? Here are a few things you should know before buying.


ENGINES
According to Mark Olson, a technical advisor and member of the Plymouth Owners Club, both the 383- and 440-cubic-inch V-8 engines were designed with performance in mind. It's been widely known that both powerplants have endured years of punishment under the hoods of Chargers, Road Runners and the like without a whimper; durability is not an issue. The same could be said of the Slant Six and 318 small-block V-8's durability, too.

"Heavy abuse from a previous owner, and even high mileage - maybe 120,000 or more - can wear internals. Fortunately, each engine is easily rebuildable, thanks in no small part to their performance heritage," Mark told us. "Everything from pistons to bearings can be obtained from multiple sources. Finding a complete block in a parts car in the salvage yard could be a bit tricky, though, especially the higher up the performance chain you go. As was the case with other makes, the full-size cars were stripped of their big-block engines long ago. Also, if you're looking for a replacement Slant Six block, the Sport Fury was not offered with that engine."

Several under-hood components do interchange between other Plymouth models, such as the radiator--the same used in B-body Plymouths--voltage regulator and wiper motor.

Plymouth offered its C-body customers a variety of engines; the lineup was consistent between model years. The 145hp, 225-cu.in. Slant Six was offered as standard equipment--perfect for the economy-minded individual; the Slant Six was not uncommon within the entire Fury family of cars, especially among the four-door body styles. There was also an overwhelming number of owners who chose the 318-cu.in. 230hp V-8, which of course provided more power, but was still relatively economical.

For more power, there were two versions of the 383-cu.in. big-block V-8: Topped by a two-barrel carburetor, the base 383 made 270hp in 1967 and 290hp in 1968, while the four-barrel version made 325hp and 330hp in 1967 and '68, respectively. Capping off the option chart was a powerful 440-cu.in. V-8 with a rated 375hp; this engine was more closely associated with the muscular B-body and E-body models, but made a show-stopping sleeper in a C-body.


TRANSMISSIONS
"If you find a Fury III with the TorqueFlite automatic that has been properly maintained, you have nothing to fear, and a well-maintained three- or four-speed manual transmission will last a lifetime. If the car has been sitting in storage without use for a prolonged period, the seals can dry out and lead to a leak," said Mark.

Long heralded as a bulletproof gearbox, the TorqueFlite was perhaps the single most popular option selected by owners over the standard three-speed manual. Also available was a floor-mounted four-speed, making it entirely possible to find one in virtually any Fury III model. Coupled with a four-barrel 383 engine, it would make for quite a sleeper. It's very uncommon, however, as engine selection dictated transmission availability. As an example, the Slant Six was not available with the four-speed, and the "Super Commando" 440 V-8 was only available with the TorqueFlite.

Should a pesky leak or failure occur, rebuild kits--complete with fresh seals--can be obtained at a reasonable cost. If you're not up to the task of performing a rebuild yourself, there are many specialists ready and willing to do it for you.


REAR AXLE
Each Fury III left the assembly line equipped with the famed 8 3/4 -inch differential with a variety of gear ratios dependent upon engine and transmission combinations; optional ratios were available, as was the Super Grip option--Chrysler Corporation's version of positive traction. This is the very differential that owners of performance Mopars long for because of its ability to ward off failure under pressure.

Although the differential appears to be identical between C- and B-body Plymouths, there is a difference in track width: The axle tubes are actually longer under the Fury models, even though the gearing and centerpiece is universal.


SUSPENSION
As with any car, constantly moving suspension parts will wear, leading to poor handling. Parts were once scarce--there was a time when the front lower ball joints were very hard to come by, for instance--but even that has changed in recent years, thanks to the resurgence of the Mopar muscle cars; virtually all the suspension components have been reproduced. Most of the Fury III parts are the same as those installed on every other Plymouth, which means that there's a lot of interchangeability. Items such as shackles, shocks and upper ball joints are as easy to obtain as walking into your local parts store.

The front suspension incorporated torsion bars and tubular shocks, which make these Furys ride very smooth and handle well. In the rear resides a standard parallel leaf spring setup with coil springs and tubular shocks. These springs have a slightly different rating in six-cylinder models than those with the heavier V-8.


BRAKES
While a standard 11-inch drum brake system was deemed adequate when the Fury III was new, it's a system that has its faults under certain road conditions, especially hilly terrain. Drivers new to a four-wheel drum setup will experience brake fade on longer downhill runs, especially if they have the habit of riding the brake the entire distance. Brake cooling then was not what it is today. Front discs were available, which helps in keeping the car straight, but it was an option not many owners sprung for.

Much of the brake system is obtainable or rebuildable. Several companies have the ability to re-sleeve wheel cylinders and master cylinders, even though a supply of new-old-stock wheel cylinders is readily available. As for the drums, a search for replacements will be more difficult, but not impossible. A stop at Rockauto.com revealed front drums costing $134 each.


CHASSIS
Mark cautioned that build quality began to slip as Fury III production rose. As a result, new cars were rolling from the assembly line with body panels and doors with a less than stellar fit. "When restoring these cars, you really have to work hard to get the alignment just right; same for the hood and trunklid. Once everything is lined up, you rarely hear of a problem with door sag and rattles."

Rust can be another worry, especially considering the vehicle's point of origin when new. Mark alluded to the fact that the undercoating used at the time failed to reach all areas. "The lower corners of the rear window on any hardtop can be an area of concern; it can be a pretty big repair job. The source of the problem had to do with the rear window seal. Rear fenders are another problem area, especially around the wheel openings where trim or fender skirts attach.

Mark went on to say, "Trunk floorpans can be just as problematic as any other B-body Mopar. This was the result of the junction between the inner and outer panels: caulking--if you will--was used in the seal, which over time becomes brittle, allowing water to seep in and migrate to the low floorpan."

Conversely, the rocker panels are less of a concern than on other makes of the time. Because they were part of the Fury III's actual structure, they were made of 8-gauge steel and sealed against the rest of the structure well enough to ward off corrosion for decades at a time.

Unfortunately for restorers, reproduction body panels simply do not exist, and finding clean panels from parts cars can be a difficult task. Likewise with brightwork, especially the aluminum trim surrounding the vertically stacked headlamps. Due to their location on the body, nearly all these trim pieces have some sort of damage.

The Fury III, as was typical of Plymouth at the time, was constructed on a unit-body platform with sub-frames. No matter the body style--two-door or four-door--each sported a 119-inch wheelbase and an overall length of 213.1 inches (the station wagon dimensions varied).

Changes in body design between the two model years were minimal and reserved for the front and rear fascia updates typical of the time. These minor alterations proved successful: Production rose from 138,275 units for the 1967 model year to 168,001 for the 1968 models; this excludes station wagons. Among that figure was an added body style for the 1968 model year: the two-door "Fast Top" hardtop, such as the example gracing these pages, owned by Ken Abbott of Valley, Alabama.


INTERIOR
The vinyl upholstery, while very durable when compared to cloth, can wear over time, particularly the armrests. Floor carpet is a another common problem area easily susceptible to wear. "Several companies do offer replacement seating material for those restoring their cars. Complete door panels are available upon request for two-door models currently, and floor carpet and headliner material is also obtainable rather easily," Mark said. "Power window switches are not impervious to wear and moisture, but they can be rebuilt by specialists."

Smaller items, such as dash switches and courtesy lamp bulbs, can still be easily bought; the same applies to convertible top parts, including pumps, weather seals and both canvas and vinyl top material. Brightwork items, such as interior door handles and steering wheel horn rings, will have to be replated.

Fury III interiors were significantly plusher than the earlier Fury I, and even Fury II, models. This included all-vinyl interiors on hardtop and convertible models. This same upholstery was optional on sedans, which were still clad in a combination of cloth and vinyl; the foam padding under each bench seat measured 2 1/4 inches thick. Front and rear armrests, radio, safety lamps, cigar lighter and an "instrument panel with non-glare floodlamps" were also standard equipment. Customers could have sprung for tinted windows, power steering, power brakes and air conditioning.

Auto Services in Missouri

Unnerstall Tire & Muffler ★★★★★

Auto Repair & Service, Tire Dealers, Automobile Inspection Stations & Services
Address: 1 E 5th St, Innsbrook
Phone: (636) 239-5494

Tim`s Automotive ★★★★★

Auto Repair & Service
Address: 4101 Waco Rd Unit E, Centralia
Phone: (573) 474-6910

St Charles Foreign Car Inc ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 1205 N 2nd St, Breckenridge-Hills
Phone: (636) 946-7023

Scherer Auto Service ★★★★★

Auto Repair & Service
Address: 6447 State Highway H, Benton
Phone: (573) 545-4111

Rogers Auto Center ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Restoration-Antique & Classic
Address: 1809 N State Route 291, Peculiar
Phone: (816) 380-7200

Rev Diy Automotive Repair ★★★★★

Auto Repair & Service, Car Wash
Address: 1900 Old Saint James Rd, Vichy
Phone: (573) 458-0030

Auto blog

'71 Plymouth Hemi Cuda Convertible sells for $3.5M [w/video]

Mon, 16 Jun 2014


We're plenty used to seeing classic cars selling for millions of dollars. It's just that they're usually European: Ferraris, Bugattis, Mercedes and the like. There are some rare American exceptions, usually wearing the names Duesenberg or Shelby. But what we have here is the most expensive Chrysler product ever sold at auction.
The vehicle in question is a Plymouth Barracuda - specifically a 1971 Hemi Cuda Convertible, chassis #BS27R1B315367 - that Mecum Auctions just sold after eight solid minutes of feverish bidding for a high bid of $3.5 million at its auction in Seattle, Washington. That figure positively eclipses the $2.2 million paid for a strikingly similar Hemi Cuda (chassis #BS27R1B269588) fetched nearly seven years ago in Scottsdale and another that was the first muscle car to break the million-dollar mark in 2002.

US Marshal's classic muscle car auction officially in the books

Thu, 25 Sep 2014

The US Marshal's so-called Blood Muscle Auction was completed earlier this month, with the prestigious nine-car field (two cars were added following Autoblog's initial story, a 1970 Chevrolet Chevelle SS 454 and a rare, mid-restoration 1971 Plymouth Hemi 'Cuda) finding new and hopefully law-abiding owners.
While we'd normally recap the stars of the show, in this particular auction, every car's sale was newsworthy. The full list of sale prices doesn't seem to be published, but according to The New York Times, the auction brought in a total of $2.5 million, or an average of about $277,000 per car.
The king of the contest seems to be a 1970 Plymouth Superbird (above, right), complete with a 426-cubic-inch Hemi V8, which brought home $575,000. The trio of Yenko Chevys, meanwhile, all easily cleared the six-figure mark, with the Yenko Camaro (above, far right) clearing $315,000, the Chevelle crossing the block for $237,500 and the supremely rare - one of just 37 - Yenko Nova (shown above, left) selling for an even $400,000.

SRT belatedly claims Plymouth Prowler as one of its own

Wed, 19 Dec 2012

Before Chrysler had Street and Racing Technology, it had Performance Vehicle Operations. What the two entities have in common, before SRT became its own brand, of course, is that each was created to take Chrysler and Dodge (and Plymouth, before it was unceremoniously killed off) vehicles to the next level of style and performance.
We'll leave the question of whether or not the old Plymouth (and later Chrysler) Prowler was ultimately a stylish, performance-oriented car to you, but the boys and girls currently leading the SRT charge at the Pentastar headquarters are keen to accept the retro-rod into the fold.
According to the automaker, all of SRT's current high-performance models owe a debt of gratitude to the old Prowler, due mostly to that car's use of lightweight bits and pieces and innovative construction techniques. If nothing else, the fact that the Prowler's frame is "the largest machined automotive part in history" is pretty cool. Read all the details here.