1995 Nissan Xe V6 4x4 Extra Cab Hardbody Pickup Very Sharp No Reserve on 2040-cars

Auto blog

Nissan Leaf Nismo RC Concept [w/video]

Nissan took the wraps off its Leaf Nismo RC Concept at the New York Auto Show more than two years ago. As inferred, the vehicle shares many of its pure-EV components with the production Leaf currently sitting in your dealer's showroom. But don't assume the concept is a placid, family friendly, four-place, front-wheel-drive plug-in for grabbing groceries - the RC (as in "Racing Challenge") is a purpose-built, two-seat, rear-wheel-drive prototype race car tuned for the short track.
The RC Concept is fitted with an 80-kW AC synchronous motor driving the rear wheels and drawing power from a 48-module lithium-ion battery. While the motor and battery are nearly identical to the consumer-friendly Leaf, a sleek full carbon-fiber monocoque body shell and a slew of other enhancements mean the RC is 40-percent lighter, a foot shorter in overall height and nearly seven inches wider than its commuter namesake. Nissan says the RC Concept will hit 62 miles per hour in about 6.8 seconds, top out at 93 mph and run for about 20 minutes under race conditions (it will accept an 80-percent charge in 30 minutes with a quick-charger). Understandably, if a zero-emissions motorsport series comes to fruition, the races would be short and nearly silent.
We caught up with the Leaf Nismo RC concept in Southern California, where we were offered the opportunity to zip it around a tight autocross at the former Marine Corps Air Station, El Toro.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.

Nissan's crowdsourced Project Titan is ready to tackle Alaska [w/videos]

Alaska still offers Americans the chance to really experience the wilderness, and Nissan is challenging its Titan pickup to its offroad extremes with a little help from its fans. After crowdsourcing a heap of mods, the company is handing it over to two Wounded Warrior Project Alumni to do their worst in the backcountry to see what the truck can do.
Nissan last experimented with the crowdsourcing idea on its Project 370Z in 2012 but might have taken things even further this time. For Project Titan, the automaker let fans vote on 10 different areas to customize on a 2014 Titan Crew Cab PRO-4X. To fit the rugged look, the company covered it up with a custom digital-camouflage wrap with a Wounded Warrior Project emblem and even outfitted its all-terrain camping trailer in a similar scheme. An LED lighting rig was also added to the new bull bar and roof rack to brighten the night. For a just little more grunt, the 5.6-liter V8 was outfitted with a Nismo cold-air intake and Borla cat-back exhaust, and to keep from getting stuck, the pickup got an upgraded suspension with more travel and 18-inch wheels with 35-inch Nitto offroad tires. The interior was also slightly revised with big GPS system and custom embroidered seats.
Now, it's time to see if the truck's mods can handle what the Alaskan wilderness can throw at it. The two Wounded Warrior Project Alumni are just starting their expedition and are expecting snow on the way. Scroll down to watch three build videos for the Titan and read Nissan's official announcement. You can also follow their journey on Nissan Trucks' Facebook page.