2001 Nissan Frontier Xe Extended Cab Pickup 2-door 2.4l on 2040-cars

Auto blog

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.

Nissan Juke to get higher-performance Nismo RC model

It's hard to find more giggles for your crossover dollar than the Juke - regardless of how you feel about the way it looks, the singularly styled nichemobile from Nissan is very entertaining to drive. Yet we've always felt that the platform had more in it, and evidently its Japanese parent agrees, having recently bracketed the googly-eyed turbocharged CUV with a new Nismo model and the barking mad built-to-order Juke R. At present, neither the Juke Nismo or the GT-R-powered Juke R are sold in North America, but the former has already been confirmed for sale here.
Even when it does reach our shores, there will still be a heck of a lot of whitespace between the mild performance upgrades of the standard Nismo and the half-mill R model, and to hear the UK's Car tell it, Nissan has plans to plug that gap, too. According to its report, the automaker will shortly offer a Juke Nismo RC that will have roughly 20 horsepower more than the basic Nismo (which itself has 197 hp, nine more than the base Juke). The RC will apparently feature a lower, stiffer suspension, upgraded brakes and a unique exhaust and intake for a snarlier soundtrack. Both front-and all-wheel drive models are planned, as are manual and CVT transmission choices.
No word yet on the RC's pricing or even North American availability, but the regular-strength Juke Nismo is expected to arrive shortly, and Nissan is also said to have big plans for its performance nameplate, so we wouldn't rule it out.