2012 Nissan 2.0 Sr on 2040-cars

Auto blog

Nissan Leaf Nismo RC Concept [w/video]

Nissan took the wraps off its Leaf Nismo RC Concept at the New York Auto Show more than two years ago. As inferred, the vehicle shares many of its pure-EV components with the production Leaf currently sitting in your dealer's showroom. But don't assume the concept is a placid, family friendly, four-place, front-wheel-drive plug-in for grabbing groceries - the RC (as in "Racing Challenge") is a purpose-built, two-seat, rear-wheel-drive prototype race car tuned for the short track.
The RC Concept is fitted with an 80-kW AC synchronous motor driving the rear wheels and drawing power from a 48-module lithium-ion battery. While the motor and battery are nearly identical to the consumer-friendly Leaf, a sleek full carbon-fiber monocoque body shell and a slew of other enhancements mean the RC is 40-percent lighter, a foot shorter in overall height and nearly seven inches wider than its commuter namesake. Nissan says the RC Concept will hit 62 miles per hour in about 6.8 seconds, top out at 93 mph and run for about 20 minutes under race conditions (it will accept an 80-percent charge in 30 minutes with a quick-charger). Understandably, if a zero-emissions motorsport series comes to fruition, the races would be short and nearly silent.
We caught up with the Leaf Nismo RC concept in Southern California, where we were offered the opportunity to zip it around a tight autocross at the former Marine Corps Air Station, El Toro.

Nissan reveals radical BladeGlider concept for Tokyo debut

Radical reinvention of the automobile doesn't happen very often. There's a reason they refer to it as "reinventing the wheel", after all. But that's what a team of racecar designers did with the original DeltaWing concept in 2010. Originally proposed as an IndyCar racer, the project was subsequently redesigned for Le Mans. That's when Nissan got on board, supported the project for a few races, then took the design in its own direction with the ZEOD RC. And now it's taking it to the road... via the auto show.
What we have here is the BladeGlider concept, a proposal for a delta-shaped electric sportscar which Nissan will present at the Tokyo Motor Show in a couple of weeks. Designed to focus on driving pleasure, the BladeGlider is about as radical as they come. Like the DeltaWing and ZEOD RC, it's got a narrow front track and wide rear to minimize drag and optimize stability, packing a 1+2 seating arrangement to put the driver front and center like in a McLaren F1, with upward-swinging doors and underbody aerodynamics to keep it glued to the road. In-wheel motors (of unspecified output) provide the power, a lightweight lithium-ion battery (not to mention the carbon-fiber bodywork) keeps it all fearther-like, and weight distribution is heavily biased towards the rear at 30:70.
A radical concept, to be sure, but here's the kicker: Nissan wants to build it. As you can see from the press release below, the BladeGlider "is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype for an upcoming production vehicle". While it would undoubtedly take some time to develop, much less certify for road, seeing one of these - or even better, driving one - on our favorite stretches of tarmac strikes us as a prospect worth waiting for.

Preserving automotive history costs big bucks

$1.8 million is spent each year to maintain GM's fleet of 600 production and concept cars.
When at least two of the Detroit Three were on the verge of death a few years back, one of the tough questions that was asked of Ford, General Motors and Chrysler execs - outside of why execs were still taking private planes to meetings - was why each company maintained huge archives of old production and concept vehicles. GM, for example, had an 1,100-vehicle collection when talk of a federal bailout began.