2011 Nissan Frontier on 2040-cars

Auto blog

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show

Foreign automakers pay from $38 to $65 per hour to non-union workers

As leaders for the United Auto Workers gather in Detroit for their Special Convention on Collective Bargaining to work out the negotiating stance for this year's new labor agreements with the Detroit 3 automakers, what they most want to do is figure out how to eliminate the two-tier wage scale. However, the lower Tier 2 wage has allowed the domestic automakers to reduce their labor costs, hire more workers, and compete better with their import competition. As it stands, per-hour labor rates including benefits are $58 at General Motors, $57 at Ford, and $48 at Fiat-Chrysler – a reflection of FCA's much greater number of Tier 2 workers. The Center for Automotive Research released a study of labor rates (including benefits) that put numbers to what the imports pay: Mercedes-Benz pays the most, at an average of $65 per hour, Volkswagen pays the least, at $38 per hour, and BMW is just a hair above that at $39 per hour. Among the Detroit competitors, Honda workers earn an average of $49 per hour, at Toyota it's $48 per hour, Nissan is $42 per hour, and Hyundai-Kia pays $41 per hour. The lower import wages are aided by their greater use of temporary workers compared to the domestics. Automotive News says the ten-dollar gap between those foreign camakers and the domestics turns out to about an extra $250 per car in labor, which adds up quickly when you're pumping out many millions of cars. That $250-per-car number is one that, come negotiating time, the Detroit 3 will want to reduce, as the UAW is trying to raise both Tier 1 and Tier 2 wages. Another wrinkle is that the domestic carmakers are considering the wide adoption of a third wage level lower than Tier 2. Some workers who do minor tasks like assembling parts trays kits and battery packs already make less than Tier 2, but the UAW will be quite wary about cementing yet another wage scale at the bottom of the system while it's trying to fight a bigger battle at the top. News Source: Automotive News - sub. req., BloombergImage Credit: AP Photo/Erik Schelzig Earnings/Financials UAW/Unions BMW Chevrolet Fiat Ford GM Honda Hyundai Kia Mercedes-Benz Nissan Toyota Volkswagen labor wages collective bargaining labor costs

Nissan alters all CVTs to act less like a stretched rubberband

Among automotive enthusiasts, no one seems to hold a neutral opinion when it comes to continuously variable transmissions. CVTs are either praised for their ability to boost fuel economy or chided for their occasionally poor driving dynamics. Nissan is among the masters of these un-shifting gearboxes in the US, and it uses them in many vehicles in its lineup. However, for the 2015 model year, several models are getting a software update to make their CVTs a bit more like a conventional automatic.
To give drivers the option of feeling gearshifts while on the road, Nissan is adding its D-Step Shift Logic feature to the CVTs in multiple vehicles. Steve Powers, Nissan's senior manager of powertrain performance, told Autoblog the system forces the transmission to "hold a ratio and then shift" to simulate the way that a traditional automatic would. It's simply a change in software, but the company "can't do it to older CVTs," he said, because it would require changes to transmission logic, as well. According to Automotive News, the upgrade is coming to the 2015 Versa, Versa Note (pictured above), Sentra, V6-equipped Altima, Pathfinder and Quest. "We're rolling it out to all programs," said Powers.
Interestingly, buyer perception appears to be pushing the upgrade. John Curl, a Nissan North America regional product manager, told Automotive News that the decision to add the tech partially comes because some owners are bothered that the CVTs aren't changing gears. According to Powers, D-Step "avoids the rubber band feel," that many drivers didn't like. The different sensation of these transmissions seems like something consumers would notice during the test drive, or that the salesperson would inform them about. The same issue cropped up last year when the company was facing customer satisfaction problems among new buyers customers' unfamiliarity with the gearboxes.