1990 Nissan Manual N/a 300zx Base Coupe 2-door 3.0l on 2040-cars

Auto blog

Nissan reveals radical BladeGlider concept for Tokyo debut

Radical reinvention of the automobile doesn't happen very often. There's a reason they refer to it as "reinventing the wheel", after all. But that's what a team of racecar designers did with the original DeltaWing concept in 2010. Originally proposed as an IndyCar racer, the project was subsequently redesigned for Le Mans. That's when Nissan got on board, supported the project for a few races, then took the design in its own direction with the ZEOD RC. And now it's taking it to the road... via the auto show.
What we have here is the BladeGlider concept, a proposal for a delta-shaped electric sportscar which Nissan will present at the Tokyo Motor Show in a couple of weeks. Designed to focus on driving pleasure, the BladeGlider is about as radical as they come. Like the DeltaWing and ZEOD RC, it's got a narrow front track and wide rear to minimize drag and optimize stability, packing a 1+2 seating arrangement to put the driver front and center like in a McLaren F1, with upward-swinging doors and underbody aerodynamics to keep it glued to the road. In-wheel motors (of unspecified output) provide the power, a lightweight lithium-ion battery (not to mention the carbon-fiber bodywork) keeps it all fearther-like, and weight distribution is heavily biased towards the rear at 30:70.
A radical concept, to be sure, but here's the kicker: Nissan wants to build it. As you can see from the press release below, the BladeGlider "is both a proposal for the future direction of Nissan electric vehicle (EV) development and an exploratory prototype for an upcoming production vehicle". While it would undoubtedly take some time to develop, much less certify for road, seeing one of these - or even better, driving one - on our favorite stretches of tarmac strikes us as a prospect worth waiting for.

Nissan Zeod RC crash test looks like crushing the tip on a pencil

Nissan has already showed us the 1.5-liter, three-cylinder engine 400 horsepower and 280 pound-feet of torque, augmented by an electric motor, that sits in back of the ZEOD RC headed for the 24 Hours of Le Mans. At the ZEOD RC's other end is a carbon fiber crash structure that has to be tested against an immovable object, and Nissan has seen fit to show us that, too.
You know what to expect if you've seen a crash test before, but the really pointy nose on this car reminds us of a Faber Castell HB pencil being sent to its death. Better yet, it's in slow motion, and you can watch it below.

Recharge Wrap-up: Reverse graffiti powered by Nissan Leaf; BMW introduces Wallbox Pro

BMW has a new, faster version of the Wallbox home EV charger. The Wallbox Pro offers 7.4 kilowatts, and can charge the BMW i3 to 80 percent in under three hours. It features a seven-inch touchscreen and proximity sensor, plus an 11.5-foot cord. The Wallbox Pro can also be used with smart home systems such as lighting and heating. The Wallbox Pro is available in Europe, and will come to the US later in the year. Read more at Hybrid Cars. Nissan is using the Leaf to power the creation of "reverse graffiti" in London. The company has commissioned artist Moose to selectively wash dirt off of a wall outside of a subway station, leaving behind a mural of London landmarks. Moose used a jet washer powered by the Leaf's battery to create the piece. The goal is to highlight the amount of pollution in London and other large cities, which is not a new idea. "It is a reminder that electric vehicles don't have an exhaust to emit the kind of air pollution which has stained the wall Moose has created his piece on," says Nissan's Jean-Pierre Diernaz. See the artwork in the gallery, and read more in the press release below. Local Motors used a 3D printer to make the Strati electric car in 44 hours. The car was printed with 212 layers of carbon-reinforced ABS thermoplastic. After printing, the team then spent two days finishing the car to make it run. It is powered by the drivetrain from a Renault Twizy, and is capable of 40 miles per hour. Now the question is if this sort of small-scale car manufacturing using 3D printing technology will catch on. See how a car gets printed in the time-lapse video below, and read more over at Treehugger. Nissan cleans up London with the world's first car-powered graffiti - Nissan LEAF powers "Reverse Graffiti" street art in Waterloo - Mass-scale mural imagines a cleaner London, without car fumes - The artwork is on show in Waterloo, London near popular Southbank LONDON – Nissan is highlighting London's battle with air quality in the UK by using the 100% electric Nissan LEAF – the world's best-selling electric vehicle (EV) – to power a striking piece of street art in Waterloo, London that depicts the capital's iconic skyline. Nissan commissioned Reverse Graffiti artist Moose – the founder of his field – to create the mass-scale mural, which was unveiled today. Unlike traditional graffiti, Moose creates his art by cleaning dirt off surfaces using a jet washer or wire brush, leaving a striking design in negative on the wall.