2004 Mitsubishi Galant Es Sedan 4-door 2.4l on 2040-cars

Auto blog

Mitsubishi recalls 130k Lancers, Outlanders over auxiliary glitches

The National Highway Traffic Safety Administration has has announced two separate recall campaigns for Mitsubishi vehicles, both of them related to problems with their auxiliary systems and covering a total of some 130,000 units. The recalls relate to Lancers (including Sportback and Evolution versions) as well as the Outlander and Outlander Sport, all of them from the 2009 through 2011 model years. The larger of the two recalls relates to the blower motor that may not to an adequate job of defrosting the windshield and therefor impede the driver's visibility. The recall covers 76,958 units, specifically the 2009-2011 Lancer (manufactured between March 16, 2009, and March 30, 2011), 2010-2011 Lancer Sportback (June 17, 2009, to December 1, 2010), 2010-2011 Lancer Evolution (July 14, 2009, to January 7, 2011), 2009-2011 Outlander (February 10, 2009, to June 22, 2011), and 2011 Outlander Sport (August 26, 2010, to November 19, 2010). The smaller recall still covers another 53,395 units due to a problem with the electronic control unit tasked with operating the headlights, taillights and windshield wipers. "Unstable voltage" in that dedicated ECU could cause those systems to function improperly – which, again, could impede the visibility and increase the risk of a crash. This recall covers the 2009-2010 Lancer (January 12, 2009, to July 6, 2010), 2010 Lancer Sportback (June 17, 2009, to June 8, 2010), 2010 Lancer Evolution (July 14, 2009, to August 4, 2010) and 2009-2010 Outlander (January 12, 2009, to August 27, 2010). In both cases the manufacturer is not aware of any accidents or injuries resulting from the problems. But all the same, in both cases, owners will be notified to bring their Mitsus into their local dealer to have the relevant component (blower motor or ECU) replaced. Since the affected models and model years overlap, we suspect some owners may have both components replaced on their vehicles at the same time, but we're reaching out to Mitsubishi Motors North America for clarification. If this array of recalled vehicles sounds familiar, you might be thinking of a similar campaign issued last October that covered some 166,000 Lancers and Outlanders from largely the same model years. That unrelated recall, however, related to the drive belt detaching from the engine.

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

Mitsubishi Pajero successor still years away, but plug-in hybrid tech likely

You might not know it from looking at today's Mitsubishi showrooms, but the struggling Japanese automaker has a pretty enviable reputation for producing robust off-roaders. Its Pajero SUV built a solid reputation worldwide on the back of its durability in harsh climates, earning it consideration alongside the likes of venerable explorers like the Toyota Land Cruiser and Land Rover Range Rover. Unfortunately, the Pajero eventually succumbed to one particularly harsh climate - the North American truck market. After enjoying a long run, Mitsubishi finally pulled the plug on the SUV's Montero twin after the 2006 model year. Blame evolving consumer tastes, low brand visibility, a lackluster marketing budget, or the need for updated product - in fact, go ahead and blame all of the above.
Despite its age, the current fourth-generation Pajero (itself arguably an extensive rework of the previous model) has been carrying a lot of water for the brand in other parts of the world since its debut in 2006. So it's pretty well time for a new one. Problem is, its replacement is still a ways off. That's according to Australia's Go Auto, which has learned that the next-generation Pajero could still be three years away, if not longer.
According to Go Auto, the next model will be a much-changed beast, with design targets including a major weight loss and increased efficiency to go along with more luxurious appointments. In order to make gains in fuel economy, the plug-in hybrid technology that the company has already introduced for its new Outlander crossover will likely be a part of the SUV's development program.