2012 Mini Cooper Hardtop 2dr Cpe Rear Defroster Security System Air Conditioning on 2040-cars

Auto blog

2020 Mini E caught in the Alps with concept looks

The upcoming full-electric 2020 Mini E hatchback has been spotted in the wild, specifically the Alps. One of our spy photographers caught it while recharging. Fans of the concept shown at the 2017 Frankfurt Motor Show will be pleased to see that this more production-ready car takes many cues from the show car. Unsurprisingly, the car does look pretty much the same as the standard Mini Hardtop. It has the round lights, broad grille section and upright Mini body. Differences show up first with the grille. Most of it is solid, which is understandable since an electric car typically doesn't need the amount of airflow an internal combustion car needs. There is a strip in the middle that is open, evident by circular cutouts. This is also a design that was featured on the concept, in which the two halves of the grille were solid, with an open slot dividing them. The rest of the bumper appears to be the same one used on the standard Mini Cooper Hardtop. The sides of the car also seem to be identical to the normal Minis, but the wheels are unique to this electric iteration. They're cool four-spoke alloys that have aren't completely symmetrical. Three of the spokes are open and finished, but one has some additional metal, and it seems to connect with the center section where the lug nuts are. There will probably be a cover that goes over these sections. The overall look is directly taken from the Frankfurt concept. At the back, the electric Mini still looks like a Mini, but with no provisions for an exhaust pipe. It also uses taillights from the pre-refresh model, but with some neat hexagonal texture on the lens. These will probably be replaced by the new Union Jack taillights, though. The interior continues the current Mini looks. The seats do have an interesting upholstery. It looks a bit like a gray denim. This production Mini E Hardtop should arrive sometime next year, in keeping with BMW's promise made with the concept car's reveal. Specs are unknown, but we hope it will be comparable in power with the original Mini E introduced for the 2009 model year. That car had an impressive 204 horsepower and 162 pound-feet of torque. Hopefully the new model will also improve on the old car's range, which was about 150 miles according to BMW. Related Video:

BMW i3s traction control tech going in all BMW, Mini cars

The BMW i3s is essentially a warmed-up version of the i3 electric car we all know and love. The performance boost isn't huge — just 14 horsepower and 15 pound-feet of torque — but it also gets a new suspension, wheels and tires as well as an improved traction control system. We found the car to benefit from all the updates when we drove it for our First Drive Review, but now BMW has offered up more details on just how the traction control system of the i3s helps make it better to drive. The company says it'll expand the technology to all future BMW and Mini models as well. The i3s's system is calibrated to help it to pull away quickly from a stop, making full use of the instantaneous torque offered by the electric motor. It also improves stability when accelerating out of corners, when using regenerative braking and, of course, when the road conditions are less than ideal. The results are palpable, and with the other improvements the i3s definitely feels stronger off the line, as we found on our drive. It's also about a half-second quicker to 60 miles per hour, at 6.8 seconds. The secret is in the response time of the stability control, which BMW claims is 50 times faster than the conventional system. This is made possible by moving the control process into the powertrain itself, rather than a remote unit. This reduces the signal path and, thus, the response time of the traction control system. BMW's Head of Chassis Development, Peter Langen, said of it, "With their high levels of torque and instantaneous responses to every movement of the accelerator, electric motors already make significantly higher demands on driving stability systems than conventional power units." While engineered to make the most of the electric motor, BMW says the shorter cycles of this traction control system show promise for internal combustion vehicles as well. As such, we'll begin to see the improved technology applied across the BMW and Mini lineups going forward. Related Video:

Mini says goodbye to Coupe and Roadster

Mini has tried a variety of body-styles in recent years, and while some of them have been successful, others have not – most especially its two-door models. Aside from the standard Hardtop (which is now available with an extra set of doors), the Clubman (which is also getting extra apertures in its next iteration) and the Paceman (which isn't expected to make it another generation), the Coupe and Roadster models have been particularly slow sellers for the brand. So after much speculation on their future, Mini is now officially showing both two-doors the door. Although the manufacturer has't said exactly when production of the two will cease at the plant in Oxford, UK, it has confirmed that "The two individual two-seater athletes Mini Coupe and Mini Roadster will finish their career together and as planned." In their place, Mini is said to be working to put the Superleggera Vision concept into production. Just when that may come to pass, or if it might breed a fixed-roof version to take the coupe's place, remain to be seen. But for now, you'll need to get your Mini with three doors or more. Related Video: THE MINI COUPE AND THE MINI ROADSTER: TWO ATHLETES TURN INTO THE FINAL STRAIGHT British premium automobile manufacturer continues the change of generation in its model program - production of both two-seater models at MINI Plant Oxford is about to end as planned. Munich, Germany, February 11, 2015. Changeover at MINI Plant Oxford: while worldwide demand for the new MINI 3 door and the new MINI 5 door launched a few months ago increases continuously, production of two model variants from the preceding generation of the original in the premium small car segment is about to come to an end. The two individual two-seater athletes MINI Coupe and MINI Roadster will finish their career together and as planned. In taking this step, the British premium car manufacturer continues the change of generation in its model program and in terms of vehicle production at the Oxford plant. The new MINI 5 door is now produced there in seven engine variants, as is the new MINI 3 door. The MINI Coupe was originally launched in the "Green Hell": the new model saw its world premiere at the 24-hour race on the Nurburgring Nordschleife immediately before its appearance at the Frankfurt International Motor Show (IAA) in 2011.