2012 Mini Cooper Hardtop on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

2020 Mini John Cooper Works GP laps the 'Ring in under 8 minutes

Mini used the occasion of the Nurburgring 24 Hours race to show off a preproduction version of its upcoming John Cooper Works GP. That's fitting, because the GP — the hottest of Mini's hot hatch offerings — has been honed specifically to conquer the Nordschleife of the famous German track. In fact, Mini says it has already lapped the North Loop in under eight minutes. An official lap time will come later because testing is apparently still underway. But to put that time into perspective, the last version of the JCW GP lapped the 'Ring in 8:23, so the new version could be half a minute faster. That's impressive, even if track performance isn't always the ideal measuring stick for street cars like the GP. We know that the GP will have more than 300 horsepower, but exact power figures have yet to be released. As you can see in the image gallery above, it will have some crazy aerodynamic additions, but probably won't wear a Nurburgring-inspired camouflage wrap when it goes into production in 2020 with a limited run of 3,000 units. And now we know that it will be much faster round the 'Ring than the previous GP — but will it be faster than the lap time of 7 minutes and 43.8 seconds recorded by the Honda Civic Type R? We'll see, but we wouldn't be surprised.

2014 Mini Cooper Clubvan

A Premium Van For The Modern-Day Milkman
We first saw the Mini Clubvan at the Geneva Motor Show in March 2012, then in December again at the Los Angeles Auto Show. Based on a stock Mini Clubman, the Clubvan's dimensions are identical, while all side windows aft of the middle pillar are blocked out from the inside with handy polycarbonate liners (read: fancy plastic) and have body color skin on the outside, while the rear windows are tinted to boot. It looks like a van and works like a van, so it must be a van. A Mini-van, though.
Where is Mini going with this relatively low-cost (to the company) product line extension? The chief market for this nimble little hauler is cities in Great Britain where they were frequently in bygone days identified as milk delivery vans. These days, though, there are - even in the US now - lower cost smaller urban delivery vans from Ford, Ram and Nissan. Therefore, the spin is that the Mini Clubvan is designed to cater to smaller boutique firms in need of making a fashionable impression while delivering the goods to people living in penthouses and such. Think: Florists, caterers, and so on.