2012 Mini Cooper Goodwood Edition,very Rare,in Florida!!! on 2040-cars

Auto blog

Mini Superleggera patent renderings suggest production prospects

Mini impressed us all when it revealed the Superleggera Vision concept at the Paris Motor Show a couple of months ago. But even before the little roadster concept debuted, there were already rumors of its production potential. And those rumors are only being further entrenched by the emergence of a series of patent renderings. Bearing much more than a passing resemblance to the concept, these images show what could be a revised, production version of the Superleggera, though not without its concessions to reality. For one thing, it looks like it's got a proper framed windshield, but it's hard to tell with the roof in place – something we never saw on the concept, either. It's also got more substantial wing mirrors, but the fin on the rear deck is still there, as are the extractor vents on the hood. We also note that the grille openings are the same shape as the concept's. Of course, the emergence of these images and their filing with the relevant authorities doesn't necessarily mean that Mini is moving ahead with the roadster's production. But if it did, it would likely ditch the concept's electric powertrain, and could stand to fill the void left by the discontinuation of the maligned, outgoing Mini Roadster that was essentially a scrunched Cabriolet with a cowling where the rear seats and stacked roof would be. Parent company BMW is likely taking into account that its rival Daimler didn't have much luck when it slotted a unique roadster of its own into the Smart lineup, so here's hoping that if it does give the Superleggera the green light, it'll have more success in the marketplace.

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini considering sports car replacement for Coupe and Roadster?

The next-generation Mini lineup could see some big changes, according to a report from Australian site CarSales. Starting with the debut of the third-generation Mini Hardtop at this year's Los Angeles Auto Show, we could see a regular string of Minis on the stages of the world. But the bodystyles we see might not be what we've grown used to.
A four-door sedan could eventually arrive, while the polarizing Mini Coupe and Roadster are likely to be replaced by a dedicated sports car with unique sheetmetal and uprated engines. While the rest of the line is switching to three-cylinder, turbocharged engines, the new sports car, which will be available in both soft- and hardtop variants, will use some version of BMW's 2.0-liter, turbocharged four-cylinder. The Aussie site also claims that the interior treatment could take inspiration from the Mini Vision concept car, while showing off the know-how BMW gained when working carbon fiber into the i3. The new model(s) would likely arrive in late 2015 or early 2016.
According to CarSales, we'll see the three-door Hardtop at the 2013 LA Show, along with a five-door hatch that is different from the Clubman at the 2014 Paris show. The Clubman, meanwhile, will arrive in Geneva in 2015, while the Convertible is slated for later that same year. The current Countryman and Paceman are expected to be around for some time, before being joined by an MPV. Eventually, the larger Minis will share their architecture with the BMW X1.