2009 Mini Cooper S John Cooper Works on 2040-cars

Auto blog

Mini Countryman Panamericana PHEV will tackle 16,000-mile trek

In addition to the electric version of the classic Mini, the cheeky British BMW subsidiary has another battery-powered offering to electrify attendees of the New York Auto Show. This one is a special version of the Mini Cooper SE Countryman ALL4, slated for a particularly impressive journey. The Mini Countryman Panamericana Plug-In Hybrid — or, rather, three of them — will traverse the world's longest north-south roadway route, traveling from North America to Tierra Del Fuego, at the very southernmost tip of South America. The biggest Mini gets a just a couple of upgrades for the high-mileage adventure, including tires with "emergency running characteristics" and a roof rack to carry a spare. The trip is meant to serve as a demonstration of the plug-in Mini's durability and performance, highlighting the benefits of a car combining electric mobility with traditional gasoline versatility. Its electric and gasoline motors provide a total of 224 horsepower, putting power to the front and rear wheels as needed. Mini notes that the Pan-American Highway, or the Panemericana, covers a total of about 16,000 miles, and requires a boat ride to cross the incomplete inter alia near the border between Panama and Colombia. The journey covers a number of different climatic zones, mountains and jungle and a range of surfaces ranging from smooth highways to gravel roads. Mini will be documenting the journey to the bottom of the world on its Instagram account. We'll be watching. Related Video: Featured Gallery Mini Countryman Panamericana Plug-In Hybrid View 19 Photos News Source: Mini Green New York Auto Show MINI Crossover Hatchback Electric Hybrid 2018 new york auto show panamericana

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Next-gen Mini Hardtop spy shots show dramatic changes

We've seen the next-generation Mini Hardtop a few times, but under significant amounts of vinyl camouflage. But apparently Mini got careless, and someone snagged photos of a completely undisguised prototype, which were shared by Twitter user Greg Kable. While the front end is a pretty predictable update, the rear end and interior are major departures. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The face will be familiar to anyone who has seen a current Mini. The grille is quite large and composed of a large contrasting frame and a body color filler in the middle, with a couple small openings at the top and bottom. It does appear to be a bit smaller overall compared to the current model, and with a thinner frame. The headlights are still round as ever, but appear a bit larger, and now they feature little lines at the top and bottom that almost look like cute eyelids. Interestingly, the hood no longer has holes cut out for the headlights, and the cut lines are higher up. The profile, as far as we can tell, is still typical Mini. The only real change there is the replacement of the pull handles with flush-fitting units. At the back is where the major exterior changes take place. The lozenge-shaped taillights of the past are gone in favor of angular trapezoidal units. They feature black-lined overlays, and they blend into the black trim piece that stretches across the hatch. The lights appear to be a part of the hatch, too, and will likely swing up with the hatch when opened. The rear fenders look wider than before relative to the greenhouse, giving this new Mini a lower, wider appearance. This particular prototype has an S badge in what looks like a yellow-green color, so we believe this may actually be an SE electric model. Moving to the inside, the new Mini holds on to some classic design cues, but reimagines them with modern technology and a minimalist theme. The dash is dominated by a huge, thin circular display, which evokes past round displays and gauge clusters from classic and more modern Minis. There's no gauge cluster in front of the driver, either, so the center screen will likely feature driving information in addition to other infotainment functions. The driver does at least get a head-up display, so there will still be the ability to have speed and other info directly in front of the driver.