2007 Mini Cooper S, Manual Transmission, Extra Clean on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini recalling 92k vehicles over airbag flaw

An issue with the airbags on Mini hatchbacks and convertibles has prompted BMW of North America and the National Highway Traffic Safety Administration to issue a recall for an estimated 91,800 vehicles. The problem, according to the notice below, stems from the occupant detection mat for the front passenger seat, which may fail to detect a passenger present and therefor fail to deploy the airbag in the event of a crash. The specific models affected by the recall are the Mini Cooper and Cooper S hardtops from the 2005 and 2006 model years and manufactured between January 5, 2005, and November 28, 2006, as well as the Mini Cooper Convertible and Cooper S Convertible from the 2005 to 2008 model years, manufactured between January 5, 2005, and July 31, 2008. To address the issue, Mini dealers will be replacing the front passenger seat occupant detection mat, with recalls set to commence on May 1. Related Video: RECALL Subject : Front Passenger Seat Occupant Detection Mat Report Receipt Date: APR 06, 2015 NHTSA Campaign Number: 15V205000 Component(s): AIR BAGS Potential Number of Units Affected: 91,800 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2006 MINI Cooper and Cooper S vehicles manufactured January 5, 2005, to November 28, 2006, and 2005-2008 MINI Cooper Convertible and Cooper S Convertible vehicles manufactured January 5, 2005, to July 31, 2008. Due to manufacturing, installation, and exposure issues, the front passenger seat occupant detection mat may not function properly and, as a result, the front passenger air bag may not deploy in a crash. CONSEQUENCE: An improperly functioning mat may cause the passenger frontal air bag to be inactive when the seat is occupied, and in the event of a crash, the air bag will not deploy, increasing the passenger's risk of injury. REMEDY: MINI will notify owners, and dealers will replace the front passenger seat occupant detection mat, free of charge. The recall is expected to begin May 1, 2015. Owners may contact MINI customer service at 1-866-825-1525. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Next Mini Clubman disguises all six doors

After revealing the new Mini hardtop in various guises, the next new model in the pipeline from the retro British marque is the Clubman. And here it is. Though still wearing some swirly camouflage, this Clubman prototype - previewed by the concept showcased last year - is clearly nearing production readiness. Since it'll have to differentiate itself from the four/five-door version of the new hardtop, the Clubman is expected to be even longer than the model it replaces. And this time, it'll have rear doors on both sides; and from these spy shots, it looks like they'll be conventional, full-size, front-hinged portals, instead of suicide doors. Around back you can also see the taillights peeking through the camo, on split rear portals instead of the one-piece, top-hinged tailgate on the standard-wheelbase model. At this stage, we wouldn't be surprised to see the new Clubman appear for the first time at the upcoming Geneva Motor Show. Whenever it does bow, it'll serve as the second pillar of the brand's reconfigured product lineup, following the new hardtop and preceding the upcoming next-gen Countryman crossover, Superleggera roadster and Minor city car.