2007 Mini Cooper Base Convertible 2-door 1.6l on 2040-cars

Auto blog

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Xcar takes the Mini Challenge, and it sounds awesome

The third-generation Mini is well and truly on sale in markets across the world. The new four-door model should be arriving soon, if it isn't already on sale in your neck of the woods, and the latest John Cooper Works model made its official debut just a few weeks ago at the 2015 Detroit Auto Show. We aren't going to be talking about any of those right now, though. That's because our chums at Xcar took it upon themselves to sample the third-generation Mini Challenge racecar, a 275-horsepower, hardcore, fully committed competition version of the otherwise adorable Mini Cooper S. At roughly 30,000 British pounds (about $45,200 at today's rates) there's a lot to like about the Challenge car. Aside from a gutted cabin and aggressive aerodynamic kit, the racer has been fitted with slick tires, a Quaife sequential gearbox, adjustable dampers, Alcon brakes and a consequently lower curb weight – under 2,600 pounds with an average-sized driver. It's fair to say the Challenge driving experience figures to be unlike your typical road-going Mini. And considering that, we think the folks that built the car, Total Track, have fulfilled their promise of delivering a "touring car experience at a fraction of the cost." Have a look at the Xcar video and let us know what you think. Be sure to crank up your speakers, because the Challenge sounds excellent.

BMW-designed Mini Cooper celebrates its 20th birthday

Mini is celebrating a major milestone. It unveiled the original Cooper Hardtop 20 years ago at the 2000 edition of the Paris auto show. More than merely a new car, this retro-styled hatchback laid the foundations for the entire brand. Its predecessors sometimes wore Mini emblems, but they were always sold by various companies including Austin, Morris, Rover, and, through a licensing deal, Innocenti. The name didn't officially denote a standalone carmaker until the hatchback was presented to the public in the French capital two decades ago. The decision to make Mini a brand came from executives at the top of BMW, which purchased England-based MG-Rover in 1994. Developing a Mini for the 21st century was a Herculean task. Releasing an evolution of the original car, which made its debut in 1959, was completely out of the question; it had outlived its expiration date by decades, and was a fossil in automotive terms. The new model had to be designed on a blank slate. And yet, the development team decided it still needed to look like a Mini, and it also had to drive like one. After experimenting with several concepts, like the futuristic ACV30 (pictured below) shown in 1997, designers settled on a basic set of guidelines. 1997 Mini ACV30 concept View 4 Photos According to Mini, the project brief stated the 21st-century model needed to have short overhangs, round headlights, a hexagonal grille, and room for four passengers. It also had to be front-wheel drive, a layout that made the original car a packaging masterpiece (and, admittedly, a bit of a nightmare to work on), but stylists decided to give it a hatch in the name of practicality. Finally, product planners decided to push the Mini upmarket, away from its roots as a value-friendly alternative to bubble cars, and embed it firmly into premium territory. Called R50 internally, the hatchback was initially offered in two variants named One and Cooper, respectively. Mini expanded the range in record time. Model year 2002 brought the hotter Cooper S (R53), a turbodiesel engine joined the European line-up in 2003, and a convertible (R52) was introduced in 2004. Sales in the United States started for the 2002 model year, and driving enthusiasts gave it a warm reception. It was well worth the wait. BMW never planned to keep Mini anchored to a single model. It introduced the second-generation Cooper in 2006, and new variants arrived in rapid-fire succession. By 2010, there was a Mini to suit nearly everyone's needs.