2006 Mini Cooper S Convertible!!! on 2040-cars

Auto blog

Manuals return to the Mini lineup for 2021

The 2021 Mini Cooper will offer a manual transmission again, after the 2020 model had to go without a stick shift due to problems certifying that powertrain. It had been hoped that the emissions issue would be straightened out in only a few months, but as it turned out, Mini had to go through the entire 2020 model year with its cars offering only two pedals. The 2020 Cooper and Cooper S models got a seven-speed dual-clutch automatic, while the John Cooper Works variants and the ALL4 versions of the Clubman and the Countryman got an eight-speed unit. For 2021, the standard Mini Cooper with the 134-hp 1.5-liter turbo three-cylinder will offer a six-speed manual in the hardtop, four-door, and convertible body styles. The 2021 Mini Cooper S, with its 189-hp 2.0-liter turbo four, also will come standard with the six-speed stick in hardtop, four-door, and convertible form. The John Cooper Works hardtop, with its 228-hp 2.0L turbo, shares in the manual-transmission goodness, but the JCW convertible remains automatic-only, with the seven-speed DCT. The 2021 301-hp John Cooper Works GP hardtop will be eight-speed automatic only. For the 2021 Clubman and the Countryman, the picture is still murky. It's likely that the JCW Clubman and JCW Countryman, which also get the 301-hp engine, will continue to be offered only with the eight-speed automatic gearbox, although the less-powerful versions could get a stick shift again. Mini says, "Manual transmission offerings will be confirmed once 2021 model year information for these models is released later this spring." Given the persona Mini has cultivated, this brand seems like one that should continue to offer stick shifts for as long as possible. Mini spokesman Andrew Cutler claims that the Mini hardtop generally has had the highest take rate for manuals in the U.S. market, with 45% buyers of the (2019-model) John Cooper Works version opting to row their own gears. Related Video:      

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.

Mini John Cooper Works GP will have over 300 horsepower

The Mini John Cooper Works GP concept from the 2017 Frankfurt Motor Show was one extreme-looking vehicle, and we now know it's because the real one will, in fact, be really extreme. The company announced that the production car will be the most powerful Mini with over 300 horsepower. In fact, it will be the most powerful Mini by a large margin, as the most potent models so far have only made 228 horsepower. And of course, it will be within striking distance of equally widened and winged cars such as the Civic Type R and Focus RS. Exact numbers haven't been revealed yet, but we wouldn't be surprised if it uses the same turbo 2.0-liter four-cylinder from the BMW X2 M35i, which makes 306 horsepower and 332 pound-feet of torque. In fact, the engine would be ideal, since the X2 is front-drive based and shares underpinnings and less-powerful engines with existing Mini products. The X2 M35i is also all-wheel-drive, which naturally brings up the idea of the GP also powering all four wheels, but Mini might choose to stay with front drive to reduce complexity and weight. Sticking with front drive would also mean that Mini could challenge the Civic Type R's record Nurburgring lap. It looks like the spirit of the concept's design will make it to production, too. The teaser images Mini released show a pretty wild looking split wing that's just a bit narrower and missing some of the concept's extraneous fins. We can also just make out fat fender flares, a big rear diffuser, and the GP's trademark four-spoke wheels. The Mini John Cooper Works GP will go into production in 2020, and Mini will only be building 3,000 examples. That's a low number, but it is more than the 2,000 units of the two previous GP generations. And considering the high output and low production, the GP will undoubtedly be a pricey hot hatch. Related Video: