2005 Mini Cooper S Supercharged 6-speed! 6 Speed No Reserve on 2040-cars

Auto blog

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Mini might build a sedan because it's running out of shapes

Rumors suggest we could soon see a Mini with a trunk to haul your junk. Autocar cites unnamed insiders who claim the sedan is part of the brand's plan for upmarket growth. There's even a possibility the new model could use the Riley moniker in reference to the Elf (pictured above) from the 1960s, which was a Mini with a tiny trunk. The Mini sedan would use BMW's front-wheel-drive platform that underpins the X1 and Clubman and might share the wheelbase and frontend styling with the Clubman as well, according to Autocar. Mini's execs think the four-door would perform especially well in North America and China, where there's less demand for hatchbacks. Ralph Mahler, vice president of Mini's product management, hinted at the possibility of the four-door to Autocar. "For example, in Asia and the US, the sedan segment is very big. This is very interesting to us, of course," he said. Mahler admits that many people don't know about the Mini-based vehicles with trunks from the '60s, like the Riley Elf, so it would be hard to market the new model on that heritage. This could be the perfect time to add a Mini sedan to the lineup, and it might not be a completely new idea for the brand under its BMW stewardship; a rumor from 2012 shows that Mini's bosses considered a four-door at least once before. The company launched new versions of its Hardtop, Convertible, and Clubman, and even added four-door and all-wheel-drive versions of the Hardtop to further blur the lines between that car, the Clubman, and the Countryman. The next-generation Countryman crossover should debut later this year, and the brand reportedly cancelled the Superleggera Vision roadster and Rocketman compact, as Mini has chosen to go big with its new models and its lineup breadth. There are only so many versions of a hatchback a company can make, and the short-lived Mini Coupe wasn't exactly a huge success. If Mini is going to try a new body style, a sedan actually makes some sense, even if we'll probably prefer the look and practicality of the hatches. Related Video:

Mini JCW GP to be hatchback only, no 'Ring record attempt in sight

The 2013 Mini John Cooper Works GP is dropping weight and lowering its lap times, but one thing it won't be losing is its flat roof. Like the original JCW GP package, Evo says that despite the fact that sportier Mini Coupes have been caught testing, the new GP will only be offered in the three-door Cooper hatchback body style. And that's perfectly fine with us.
Evo spoke with GP development chief Jorg Weidinger who said that as a part of the car's history, "It was a hatch, it is a hatch and it should stay a hatch." Weidinger also said that Mini is not planning to set any Nürburgring records with the new JCW GP even though earlier reports indicate that the car is a full 20 seconds faster around the 'Ring than its 2006 predecessor.
The new Mini John Cooper Works GP weighs 121 pounds less than the John Cooper Works Hardtop, offers a fully adjustable coil-over suspension and it will have a starting price of $39,950, (including $700 for destination) when it goes on sale later this year.