2005 Mini Cooper Convertible Just 47,000 Miles Florida Owned Car on 2040-cars

Auto blog

2013 Mini John Cooper Works GP will start at $39,950*

Get your wallets ready, folks. The 2013 Mini John Cooper Works GP arrives this fall, and we've now learned that the cost of entry for the potent little hatchback is $39,950, (*) including $700 for destination.
Aside from an adorably tough appearance, that just-under-$40,000 price tag gets you a whole host of performance goodies, including a turbocharged four-cylinder engine good for 218 horsepower and as much as 207 pound-feet of torque. No, that isn't any more oomph than what you get in the standard JCW Hardtop, but there's a whole lot more to the GP kit. For starters, there's a fully adjustable coilover suspension, not to mention a reduction in overall weight - at 2,558 pounds, the GP is 121 pounds lighter than a normal John Cooper Works Hardtop.
A Mini spokesperson confirmed to Autoblog that the JCW GP can only be purchased one way, and will be offered as an option package on the standard John Cooper Works Hardtop. Its starting price represents a $5,150 increase over a standard JCW model, and is the most expensive model in the Mini range (the next being the $35,550 John Cooper Works Countryman).

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Why the 2020 Mini John Cooper Works GP doesn't have a manual

LOS ANGELES — The 2020 Mini John Cooper Works GP is an interesting machine. While it shares a lot in common with its predecessors, such as the big rear wing, no rear seat, four-spoke wheels and other aggressive design cues, it has a number of distinct differences. In particular, it has a massive amount of power relative to old models, and it doesn't have a manual transmission. This all left us with some questions that we brought to some Mini representatives. We'll start with the big one: "Where's our manual?" The representatives said a lot about how manual take rates are declining, and the smooth, quick-shifting automatic transmission fits a track-oriented car. But they also eventually admitted that they don't have a manual transmission available that would be strong enough to handle the turbo 2.0-liter engine's 301 horsepower and prodigious 332 pound-feet of torque. On the other hand, the engine, which is also used in the John Cooper Works Countryman, Clubman, and small BMWs, already has an automatic developed. And obviously, the company didn't feel it was worth it to develop a stronger gearbox for a run of just 3,000 cars. At the very least, having experienced Mini automatics in the past, they are good, and to make the experience a little more engaging, Mini has custom 3D-printed aluminum alloy shift paddles for the GP that do feel good. Another thing we were curious about was the disappearance of the Nurburgring lap time from the dashboard. Spy shots showed a time of 7:56.69 on a 3D-printed dash panel. The 3D-printed dashboard remains, but it will now have each model's production number instead. The display car uses 2020 as an example. The Mini representatives said that past customers cared more about which number of car they had, rather than a lap time. This is also in keeping with past GP models that all displayed their production numbers somewhere in the interior. The new GP's most striking features, though, are its carbon fiber fender flares. They serve a couple of purposes, such as accommodating the car's wider track and tires. According to one of the representatives, they also help direct airflow and reduce drag, but she didn't say by how much. Then there's the appearance, which is unusual at the least, looking almost like vertical wings, and it's inspired by the outrageous concept. Although they're made of carbon fiber, it's more of a molded style than the woven variety seen on many cars.