+++ +++ +++ ++ ++!!!! 2003 Mini Cooper Base !!!++ ++ +++ +++ +++ Clean Car on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

2016 John Cooper Works Clubman is torquiest Mini ever

Mini fancies its latest Clubman as more an executive car than a typical premium compact. Think BMW 5 Series to the regular Hardtop's 3 Series. With that in mind, you can think of the new John Cooper Works Clubman as a Mini M5 of sorts. The new JCW Clubman boasts a number of features not offered on its little brothers. Mini engineers are squeezing 228 horsepower out of the 2.0-liter, turbocharged four-cylinder, just like on the Hardtop model. But the bigger John Cooper Works gets a significant bump in torque, up from 236 pound-feet of torque to a more robust 258 lb-ft. And with a standard All4 all-wheel-drive system, the JCW Clubman maximizes the ability to deploy that extra power. View 15 Photos Regardless of transmission, the new Works model hits 60 in 6.0 seconds and runs up to 147 miles per hour, 0.9 seconds quicker and five miles per hour faster than the S model we drove last year. A sportier suspension, meanwhile, drops the ride height 0.4 inches, so expect at least slightly better handling from Mini's newest Works model. Exclusive two-piece sport seats should keep drivers in place while exercising the newfound handling ability. But beyond the extra power, all-wheel drive, upgraded suspension, and neat seats, the JCW Clubman is largely a mishmash of parts we know and like. It uses the same standard six-speed manual and optional eight-speed automatic as the regular car, while the polarizing six-doored body wears the usual JCW tinsel – 18-inch wheels and a more aggressive body kit that promises better engine and brake cooling. And it still has a weight problem – the new car weighs in just under 3,500 pounds to the standard car's 3,300-pound curb weight. Mini hasn't published pricing, but if the trend set by the Hardtop and Convertible continues, we'd wager the new JCW will start around $35,500, tacking $6,000 onto the S model's $29,450. Well, at least Mini has the executive-level pricing down. The John Cooper Works Clubman should hit US dealers in December. Related Video: Related Gallery 2016 Mini John Cooper Works Clubman View 18 Photos News Source: MiniImage Credit: Live photos copyright 2016 Drew Phillips / AOL MINI Wagon Luxury Performance mini clubman

Mini Clubman All4 Scrambler Concept is the big Mini we want

Mini of Italy built a butch version of the Clubman for the 2016 Valentino Park Motor Show. Called the All4 Scrambler, it's what happens when a Mini takes inspiration from a BMW R Nine T Scrambler motorcycle. We must say, we like this brutish little car. The matte paint is Frozen Grey, a favorite of BMW's high-performance M cars, while the roof is black. There's a luggage rack up there, and the old-school leather suitcase in the cargo area looks like it'd be right at home strapped to the back of an touring bike like the R Nine T Scrambler. In fact, the best thing about this Clubman is the way Mini of Italy has blended the motorcycle's characteristics into a compact wagon. The knobbly tires are more aggressive than the R Nine T, but the overall aesthetic effect is the same. The rubber looks sporty and, unlike the production Clubman, they do a better job of filling out the wheel wells. Add in the rally lights and It's a great look. It's harder to see in these images, but there's also a matte black applique on the front and rear bumpers, side sills, and around the wheel arches. It's a practical move, of course, but it's also makes for a nice, aggressive effect. Mini's tweaks in the cabin are modest. The Nappa leather and Alcantara upholstery comes in a rich tan shade meant to mimic the R Nine T's seat. It looks so good we wish Mini offered some version of the color on the production Clubman – every car should have a tan leather option. The headliner gets an Alcantara finish, too. Overall, Mini of Italy has built a handsome, production-based concept. Buon lavoro, I miei amici. Related Video: