2011 Mini Clubman S on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini Cooper SE ditches ‘Corona Spoke’ wheel name for obvious reasons

We’ve recently spent time in the all-electric 2020 Mini Cooper SE, and weÂ’ve found it to be plenty of fun. It packs all the Mini charm with none of the tailpipe emissions. Part of its quirky appeal is its styling, and the top Iconic trim has those funky 17-inch wheels that resemble a U.K. power outlet, ringed in a bright yellow circle. Those wheels, called “Corona Spoke,” are getting a name change. TheyÂ’re now called “Power Spoke.” As a Mini spokesperson told CarBuzz, “This was done to ensure Mini remains sensitive to all those experiencing the widespread impacts of Covid-19,” despite the naming coming long before the coronavirus pandemic. Indeed, MiniÂ’s press release from last July applies the “Corona Spoke” name to the asymmetrical, “aerodynamically optimized” alloy wheels. The Monroney sticker for our recent tester also listed the "17" MINI E Corona Spoke 2-tone" wheels. The name change is a minor footnote in the saga of the coronavirus pandemic, but it's understandable. So with any handwringing over an unfortunate naming coincidence thwarted, we can get back to appreciating the electric Mini for the joy it is. We should note that in addition to being a fun little EV, we also discovered that the Mini SEÂ’s electric range is very conservative — we were able to handily best its 110-mile EPA rating. Related Video:

Why the 2020 Mini John Cooper Works GP doesn't have a manual

LOS ANGELES — The 2020 Mini John Cooper Works GP is an interesting machine. While it shares a lot in common with its predecessors, such as the big rear wing, no rear seat, four-spoke wheels and other aggressive design cues, it has a number of distinct differences. In particular, it has a massive amount of power relative to old models, and it doesn't have a manual transmission. This all left us with some questions that we brought to some Mini representatives. We'll start with the big one: "Where's our manual?" The representatives said a lot about how manual take rates are declining, and the smooth, quick-shifting automatic transmission fits a track-oriented car. But they also eventually admitted that they don't have a manual transmission available that would be strong enough to handle the turbo 2.0-liter engine's 301 horsepower and prodigious 332 pound-feet of torque. On the other hand, the engine, which is also used in the John Cooper Works Countryman, Clubman, and small BMWs, already has an automatic developed. And obviously, the company didn't feel it was worth it to develop a stronger gearbox for a run of just 3,000 cars. At the very least, having experienced Mini automatics in the past, they are good, and to make the experience a little more engaging, Mini has custom 3D-printed aluminum alloy shift paddles for the GP that do feel good. Another thing we were curious about was the disappearance of the Nurburgring lap time from the dashboard. Spy shots showed a time of 7:56.69 on a 3D-printed dash panel. The 3D-printed dashboard remains, but it will now have each model's production number instead. The display car uses 2020 as an example. The Mini representatives said that past customers cared more about which number of car they had, rather than a lap time. This is also in keeping with past GP models that all displayed their production numbers somewhere in the interior. The new GP's most striking features, though, are its carbon fiber fender flares. They serve a couple of purposes, such as accommodating the car's wider track and tires. According to one of the representatives, they also help direct airflow and reduce drag, but she didn't say by how much. Then there's the appearance, which is unusual at the least, looking almost like vertical wings, and it's inspired by the outrageous concept. Although they're made of carbon fiber, it's more of a molded style than the woven variety seen on many cars.