2017 Mini Countryman Countryman on 2040-cars

Auto blog

Mini ditches four-seat Countryman

Mini is walking away from the rear bucket seats in its Countryman crossover. MotoringFile.com reports that starting in 2013, the CUV will no longer offer just two seats in the second row. Originally, Mini was forced to offer the buckets due to National Highway Traffic Safety Administration rules governing the the minimum vehicle width for the allowance of three-wide seating. That rule was recently changed, which allowed Mini to offer the bench seat. Not surprisingly, few buyers have opted for the awkward bucket-and-rail configuration since. Moving forward, all Countryman models will also come with the vehicle's flat-load rear floor as well.
During our time with our long-term Countryman, we found the middle rail between the two buckets to be a bit gimmicky, especially given the fact that the cup holders were only large enough to accommodate a 12-ounce can.

Mini USA will temporarily stop importing manual transmissions

Emissions certification woes strike again, this time at Mini. The U.S. arm of Blighty's iconic car company has had to temporarily put a stop to importing any models with manual transmissions beginning with July production, which is when BMW typically begins rolling the new model year down assembly lines. According to MotoringFile, calibration testing for the six-speed manual is taking longer than expected. The outlet guesses the interruption will conclude by September, because it has "seen these type of delays in the past and they've lasted from 1-4 months." It has queried the brand's head of communication, who said, "As much as we at MINI USA would like to have a definitive timeline, it would be too early to say." The spokesman did, however, say that Mini remains committed to the manual gearbox. That comes in contrast to Toyota's recent breakdown of manual take-rates across a range of vehicle types, Hyundai jettisoning the manual on the 2020 Elantra, and stalwart enthusiast rides like the Ford Mustang Shelby GT500 and Chevrolet Corvette leaving the stick-shift fold. Nevertheless, Mini's efforts feel, at best, like raging against the dying of the light, especially because the end of the MF report states, "the other big news is that Mini USA is also eliminating the manual option from some models all-together." MF isn't yet certain about which models are affected, though. Buyers stepping up during the row-your-own intermission will get a crack at the long awaited seven-speed dual-clutch transmission or a revised eight-speed automatic. The DCT will slide into the Cooper and Coooper S models, the traditional automatic makes a home in the 301-horsepower John Cooper Works Clubman and Countryman.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video: