2003 Mini Cooper Hardtop on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

2020 Mini Cooper SE Drivers' Notes | Two editors, two cities, one electric car

The 2020 Mini Cooper SE is Mini's first electric car that it's actually selling widely to the public, rather than a quasi-experimental product a select few could lease. While in most respects, it looks like a plain Mini Hardtop or Cooper S, it instead has a BMW i3 electric motor under the hood. The SE makes 181 horsepower and 199 pound-feet of torque. Between the front seats and under the rear seats are battery packs that give the Mini an estimated 110 miles of range. The new powertrain means the electric Mini sits ever so slightly higher, but it has a lower center of gravity than other Minis, and it has a perfectly even weight distribution front to rear. To get an idea as to what it's like to live with this spunky little commuter, Managing Editor Greg Rasa in Seattle and News Editor Joel Stocksdale in Detroit each spent a week with one. Both cars were the top shelf Iconic trim, bringing the starting price to $37,750 after the $850 destination charge. The SE is also eligible for the $7,500 federal tax credit, making that high price sting a bit less. Check out their thoughts in the discussion below. Joel Stocksdale: Want to talk Mini? Greg Rasa: Sure. So, how to begin ... Fun car. Way fun. JS: So much fun! I took it out for pleasure cruises at least every other day just because it was such a blast. GR: I took mine on some long outings and was pleased with it in every respect. Some background: I drove a 2013 Leaf as a commuter for a couple of years, so that's kind of my baseline for an EV — utilitarian, basic, purpose-built for commuting. And of course I have driven other EVs quite a bit, Niro, etc. The difference with the Mini is apparent from the first impression. Stepping into it, there's a wow factor. Nice interior, quilted seats, yellow racing stripe in the carbon fiber-look dash, goofy space-age sounds. Everything screams fun. JS: What really got me fired up about the driving was the handling. Minis are already great in corners, but this one feels particularly good, and I think a lot of it has to do with the weight balance. It's an even 50/50 front/rear distribution, and you can feel that in turns. It's very neutral and has loads of grip despite the low-rolling-resistance tires. I desperately want to take one to an autocross event. GR: Yes, very grippy. All EVs tend to handle well, I think, given how planted they are with the battery weight down low, but the Mini is the best yet. You're in a John Cooper Works (JCW) now, right?

Mini Clubman Bond Street inspired by London shopping

Mini again plucks a London landmark as the appellation for a special edition, the Mini Clubman Bond Street joining the Mayfair and Camden, and Bayswater and Baker Street editions of the recent past. You'll recognize the formula of primary color and polished contrasting color, in this case its Midnight Black Metallic for the main event and Cool Champagne for the highlights like the roof, mirror caps and trim rings on the 17-inch alloy wheels. Inside it's Carbon Black leather set off by surfaces in Deep Champagne and the Chrome Line package.
It will premiere at the Geneva Motor Show in March before going into production for a limited run that same month. Four engines will be offered, with on-the-road prices ranging from 20,275 pounds ($31,961 US) in the UK for the 122-horsepower gas engine to 24,045 pounds ($37,918 US) for the 143-horsepower SD diesel version. A press release below will tell you all you wish to know.