2010 Mini Cooper S S on 2040-cars

Auto blog

Next-gen Mini could sire 10 different models including PHEV

The first generation of the reimagined, BMW-backed Mini was a simple things, confined to two body styles - hatchback and four-seat convertible. It wasn't until the second-generation platform came along that Mini began truly expanding, offering a long-wheelbase model, a roadster, a coupe, a five-door crossover, and a three-door, um, thing?
BMW is aiming for 10 to 12 different vehicles from just two brands off one platform.
According to an interview between Automotive News Europe and the BMW board member that oversees Mini, Peter Schwarzenbauer, the funky British brand will be expanding far beyond the seven body styles it currently offers. "With the new ULK architecture, we currently have in mind eight to 10 models," Schwarzenbauer told ANE. That architecture he mentions, will also underpin the BMW 1 Series GT and the BMW X1, meaning that BMW is aiming for 10 to 12 different vehicles from just two brands off one platform (and that's only what we know about).

NHTSA slaps BMW with $40M fine for slow Mini recall

BMW is on the hook for a $40-million fine after the National Highway Traffic Safety Administration slapped the automaker over not recalling Minis that failed to meet minimum side-impact crash standards. The civil penalty from NHTSA concerns 2014 and 2015 Mini Cooper hatchback models that "failed a crash test designed to determine whether the vehicle met crash-protection minimums," the government agency said in a press release issued this week. An October 2014 test revealed the first problem, and the Mini was subsequently retested in July, only to fail again and finally prompt a recall of more than 30,000 cars. But according to NHTSA's investigation that was opened in October, BMW waited too long to issue a recall after it knew the cars did not meet standards and bring them into compliance with more energy-absorbing materials installed by Mini dealers. This is the second time NHTSA slapped BMW with a major penalty, following a $3-million fine back in 2012 failing to report recalls of its cars and motorcycles. "For the second time in three years, BMW has been penalized for failing to meet that obligation," NHTSA Administrator Mark Rosekind said in the release. "The company must take this opportunity to reform its procedures and its culture to put safety where it belongs: at the top of its priority list." In a separate release issued this week, BMW Group said it, "is committed to further improving its recall processes to better serve its customers," and that the company, "respects the role of NHTSA and looks forward to working with them to develop solutions for the future." National Highway Traffic Safety Administration fines BMW $40 million for failing to meet safety requirements Fine is auto company's second since 2012 WASHINGTON – The U.S. Department of Transportation's National Highway Traffic Safety Administration has imposed a $40 million civil penalty and a series of performance requirements to automaker BMW North America for a series of violations of the Motor Vehicle Safety Act and NHTSA regulations. Under terms of a Consent Order issued to BMW, the company acknowledges that it violated requirements to issue a timely recall of vehicles that did not comply with minimum crash protection standards, to notify owners of recalls in a timely fashion, and to provide accurate information about its recalls to NHTSA. NHTSA imposed a $3 million civil penalty to BMW in 2012 for similar violations.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video: