2008 Mini Cooper S on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini lineup could expand to include up to 10 models, still no hope for Rocketman

During an event in Ponce, Puerto Rico last week where Mini introduced members of the media to the 2013 Paceman and John Cooper Works GP, product planners discussed that the brand's lineup could expand to eventually include up to 10 bodystyles. Currently, the Mini range consists of seven models: the Hardtop, Clubman, Convertible, Countryman, Coupe, Roadster and Paceman.
Speaking to members of the media, David Duncan, Mini USA sales manager, said that these new models could fall into a range of niches - "any segment that makes sense for a small car." No specific vehicle classes were discussed, but Duncan stated that the possibilities are endless, "as long as we're the smallest player in any segment."
Well, nearly endless. We've been hoping that Mini would re-think its decision to nix plans to create a vehicle smaller than the Hardtop - a notion previewed by the excellent Rocketman concept (shown above) from the 2011 Geneva Motor Show - but the automaker once again stated that this is absolutely off the table. In order to create a vehicle of the Rocketman's size, a completely new platform would have to be engineered (that's expensive), and while Mini has looked into acquiring existing architecture from another brand, parent company BMW has reportedly put the kibosh on such an act. If a Rocketman is ever to be born, BMW/Mini will do it on its own, and right now, that simply isn't in the cards.

Mini's matte Countryman Black Knight Edition rises

Mini is certainly no stranger to a special edition, as unique option and styling packs have been a staple of the Mini line since its return to the US market, but it's next special trim is quite a big departure from previous cars. It's based on the Countryman, and is called the Black Knight Edition.
As you cans see from the image up top, it'll sport a sinister, matte-black paint scheme, making this Mini not unlike BMW's range of Frozen Edition cars. First reported on by those Mini-obsessed folks at MotoringFile, the Black Knight Edition Countryman will be limited to 60 units, and will be offered on a first-come, first-serve basis, making this car quite a bit different from previous special editions, which generally stuck around for a full model year.
According to MF, the matte finish will only be available on the Cooper S Countryman, although oddly, one of the teaser images shows a John Cooper Works badge. BKE models should be coming nearly loaded, which means that there's not a lot of customization done and the price tag is probably going to be exorbitant for a Mini. Buyers will, though, have the choice of front- or all-wheel drive and a choice of six-speed manual or six-speed automatic.