2011 Mini Cooper Clubman Wagon 3-door 1.6l on 2040-cars

Auto blog

Meet the Mini Urbanaut concept: an autonomous Mini minivan

If car designers are to be believed, the future of fully-autonomous electric vehicles is the box. Whether it's squared-off or rounded, it seems many autonomous concept vehicles are vans meant to efficiently carry people and stuff, or be a new living space. And that's the case with the Mini Urbanaut concept, just on a smaller scale. The Urbanaut measures in at 14.6 feet long, which is a little more than 2 feet shorter than a Toyota Sienna. But if it were put into production, it would be the biggest Mini on sale at roughly half a foot longer than the Countryman, and easily as tall if not taller (Mini didn't provide an exact height). It takes the one-box shape close to its extremes, similar to a VW Bus, which itself is seeing an electric revival. At the front, an aluminum grille inspired by the current Mini grille hides LED lights for illumination and communication, and taillights get similar aluminum coverings. The wheels are translucent and illuminated. There are cutouts that are inspired by the Union Jack flag. The Urbanaut features two particularly unusual design choices, though. The first is that it has a single sliding door for interior access. The second is that one of the C-pillars is actually a sort of display case that can store a variety of souvenirs or other trinkets. Isn't that cute? The interior has seating for four, with a rear bench and conventional bucket seat at the front for the driver next to a sort of jump seat. The driver seat can swivel to face the front for manual driving, or to face the middle for parked or autonomous modes. In between the rows of seats is a table with a decorative plant as well as the main instrument display and infotainment interface. The screen is round, a callback to old Mini instruments and the current cars' center infotainment binnacle. The idea is that the Urbanaut would primarily be used in autonomous or parked modes with occupants facing toward the middle. There is, however, a secondary display that activates at the front when the car is in manual driving mode. The interior has a number of nifty party tricks. There's a ceiling section above the rear seats called the "Loop" that has animated illumination behind a fabric covering. The dashboard lowers at the front in the stationary mode to create a daybed. The windshield can open up, too, when parked. Different vehicle modes are accessed by placing the key fob, called the "Mini Token," in the corresponding slot.

BMW will electrify all brands and model lines, including Mini

BMW has announced that it plans to produce a fully electric version of the three-door hatchback Mini. The car will go into production in 2019, and the battery electric drivetrain will be produced at BMW's Bavarian facilities, then transported to Plant Oxford where it will join the cars. BMW says there will remain a diesel variant in addition to the petrol, plug-in hybrid, and EV versions of the Mini. No prototype shots have been released of the upcoming cars; the current one was unveiled in late 2013. The UK production location isn't the only place where BMW builds Minis, as the former Volvo/Mitsubishi/Smart NedCar plant in the Netherlands has been tooled to build some of the 360,000 Minis built yearly. According to the BBC, UK Business Secretary Greg Clark considers the choice to build EV Minis in Britain a "vote of confidence" despite Brexit, and that it would see battery technology development boosted in the UK. By the time the EV version starts production, UK will likely have already left the European Union. The electrification of the Mini is part of BMW Group's continuing addition of full-electric or plug-in versions to all its brands and model series. Of all the vehicles it will sell in 2025, 15-25 percent will be electrified in one way or the other. Similarly to Volvo, BMW sees flexible production to be in a key position in the future: The facilities would have to be able to build all versions at the same time, as markets fluctuate depending on incentives and infrastructure. If EVs sell strongly, the production process can quickly respond to the demand. An electric Mini underwent trials back in 2008, so the full-scale production vehicle would have over a decade's worth of engineering behind it. Green BMW MINI mini ev bmw group

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.