2009 Mini Cooper S Clubman One-owner Red 6-speed Alloys 50k Clean Inspected on 2040-cars

Auto blog

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

Mini confirms first plug-in hybrid and it looks like it's based on the Countryman

Mini confirmed Sunday it's developing its first plug-in hybrid model, apparently based on the Countryman. The hybrid will utilize an electric motor that works with a combustion engine, expected to be a 1.5-liter turbocharged three-cylinder unit. Though the actual name wasn't specified, Mini said the vehicle will have two driving modes. With Auto eDrive, it can reach speeds of up to 50 miles per hour. Switching into Max eDrive increases top speed to approximately 77 miles per hour. The electric motor sends all of its power to the rear wheels, while the combustion engine powers the front wheels. The engine only kicks on in certain situations. Mashing the throttle brings the engine to life, as does switching the car into "Save Battery" mode, which allows the engine to charge the hybrid's battery through a generator while powering the vehicle. The engine also comes on if the vehicle's all-wheel-drive-system senses a loss in traction. Inside, the changes include a yellow start/stop button (instead of red) and a power display in place of the traditional tachometer. Mini's previous electrification efforts included the Mini E, which had a range under 100 miles and was available for leasing in 2009. Expect the plug-in hybrid to debut in 2019. Related Video: Featured Gallery Mini Plug-In Hybrid Related Gallery Mini Countryman Plug-in Hybrid Spy Shots View 13 Photos Green MINI Crossover Hybrid PHEV confirmed

Mini bringing new 230-hp John Cooper Works to Detroit

Mini models may keep getting incrementally bigger, but then so do their engines. Or more powerful, anyway - especially when it comes to the John Cooper Works performance models. The JCW version of the first (post-revival) generation R50, which was really more of an upgraded Cooper S than its own model, packed a 1.6-liter supercharged four with 200 horsepower. The following R56 JCW upped that incrementally to 208 hp, but the next Works hatchback is now rumored to pack around 230 horses.
Tipped to be revealed in both three- and five-door body-styles at the 2015 Detroit Auto Show half a year from now, the F56-gen Mini John Cooper Works hatchback is expected to use the same 2.0-liter turbo four as the new Mini Cooper S, but increasing the output from 189 hp to approximately 230. That would mean it would be more powerful than either of the two previous John Cooper Works GP editions to make the new JCW the most powerful road-going Mini to date, backed by 285 pound-feet of torque driving through a six-speed manual or available automatic transmission to deliver what promises to be a blistering pace for the latest retro hatchback.