44k Leather Remote Start 4x4 Runs/drives Like New Great Car Rebuilt Title 09 07 on 2040-cars

Auto blog

Junkyard Gem: 1989 Mercury Tracer Four-Door Hatchback

During the life of the Mercury brand, which began in 1939 and ended in 2011, nearly every Mercury sold in North America was a cosmetically enhanced version of some Ford model also sold here. The exceptions to this rule came when Mercury sold Fords originally designed for non-North American markets, and for which no Ford-branded version existed on our shores. The 1991-1994 Capri was such a car, as was the 1999-2002 Cougar (the Mondeo-based Cougar was unique among all Mercuries in that no other cars in the sprawling Ford Empire shared its body). The 1970-1978 Capri was sold through Mercury dealers here, but never had Mercury badging. One of the rarest of all these Mercury cars was the first-generation Tracer, a Mazda design that made its way here via Australia. The bloodline of the Tracer goes back to the Mazda 323, the ancestor of today's Mazda3 and the platform used for all those US-market Ford Escorts of the 1990s. Starting in 1991, the Tracer name went onto badge-engineered Escorts, according to Mercury tradition, but the 1988-1989 Tracers were based on the Australian-market Ford KE Laser. Underneath all of those cars (as well as the early-1990s Capris) lived Mazda 323 running gear, of course. This one nearly made it to the 175,000-mile mark during its time on the road, which is respectable by the standards of 1980s Mazdas. With an automatic transmission transferring the 84 horses from its Mazda B6 engine to the front wheels, this car wouldn't have offered a great deal of driving excitement. 1989 Tracer buyers could choose between a two-door hatchback, a four-door hatchback, and a four-door wagon. Not many Americans hurried over to their local Mercury dealers to buy Tracers, despite the fact that the nearest Ford-badged identical twins were on the other side of the globe. Mercury still seemed relevant in the late 1980s, but its days were numbered. The actress driving the Tracer in this TV commercial seems to have the same deer-in-headlights facial expression of the hapless driver-training students in the 1968 AMC Rebel commercial.

Junkyard Gem: 1992 Mercury Grand Marquis LS

We've all been seeing the instantly familiar Ford Crown Victoria P71 Police Interceptor on North American roads for what seems like forever, though in fact the very first of the aerodynamic Crown Vics didn't appear until a mere 31 years ago. Yes, after more than a decade of boxy LTD Crown Victorias, Dearborn took the late-1970s-vintage Panther platform and added a brand-new, Taurus-influenced smooth body and modern overhead-cam V8 engine, giving us the 1992 Ford Crown Victoria. The rule was, since 1939, that (nearly) every Ford model needed a corresponding Mercury, and so the Mercury Division applied different grille and taillights and the rejuvenated Grand Marquis was born. Here's one of the first of those cars to be built, now residing in a Denver-area self-service boneyard. The Marquis name goes respectably far back, to the late 1960s and a Mercurized version of the Ford LTD hardtop. The Grand Marquis began life as the name for an interior trim package on the 1974 Marquis Brougham (also LTD-based), eventually becoming a model in its own right for the 1979 model year. Today's Junkyard Gem came off the Ontario assembly line in March 1991, making one of the very first examples built. For 1992 (and through 2011), the Grand Marquis was a Crown Victoria with slightly enhanced bragging rights. This one has the top-grade LS trim, with an MSRP of $20,644 (that's about $44,370 in inflation-adjusted 2022 dollars). The corresponding Ford-badged model (built on the same assembly line by the same workers) would have been the Crown Victoria LX, which actually cost a bit more: $20,987 ($44,910 now). The very cheapest civilian 1992 Crown Vic cost just $19,563 ($42,045 today). There weren't any powertrain differences between the Crown Victoria and Grand Marquis in 1992. The only engine available was this Modular 4.6 SOHC V8, rated at either 190 (single exhaust) or 210 (dual exhaust) horsepower. The transmission was a four-speed automatic with overdrive. How many miles are on this one? Can't say! Based on the worn-out interior, I'm going to guess 221,719 miles passed beneath this car's wheels during its 32-plus years on the road. I've seen some very high-mile Police Interceptors, of course, including one with 412,013 miles, but Ford didn't go to six-digit odometers in the Grand Marquis until a bit deeper into the 1990s. Thanks to flawed speech-to-text applications on smartphones, the Grand Marquis is known as the "Grandma Keith" to many of us today.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: