2010 Mercury Mariner Premier 4wd on 2040-cars

Auto blog

Junkyard Gem: 1973 Mercury Marquis Brougham 4-Door Pillared Hardtop

Ford's Mercury Division debuted the Marquis in the 1967 model year, as a sporty coupe based on a stretched Ford LTD chassis. When the LTD got an update for 1969, so did the Marquis, and production of that generation of the top-of-the-line Mercury continued through 1978 (the Grand Marquis hit streets the following year). The 1969-1978 Marquis was a big, imposing land yacht, and the Brougham version came absolutely loaded with affordable luxury. Today's Junkyard Gem is a Marquis Brougham from the first year of the Malaise Era, found in a Phoenix self-service car graveyard recently. This car appears to have spent decades sitting outdoors in one of the harshest climates in the country, and so it's in rough shape. The vinyl top received the full thermonuclear treatment and is mostly obliterated by now. The interior got thoroughly cooked as well. Still, its original opulence shines through if you use some imagination. What hurts is that this car was packed with most of the good options, including the mighty 460-cubic-inch (7.5-liter) V8 engine with four-barrel carburetor. The price for the 460 was just $76 in this car, or around $548 in today's money. The base engine was a 429 (7.0-liter). Power numbers were way down for 1973 when compared to a couple of years earlier, partly as the result of tightening emissions standards but mostly due to the switch from gross to net power ratings that began midway during 1971 and was completed by the end of 1972. This engine was rated at 202 horsepower and 330 pound-feet. The only transmission available was a three-speed automatic. We can assume that the original buyer of this car and its single-digit fuel economy had a rough time when the OPEC oil embargo hit in the fall of 1973. Believe it or not, air conditioning was not standard equipment on the '73 Marquis Brougham (you had to move up to a Lincoln for that). This one even has the automatic temperature control feature, adding a total of $508 to the cost of this car (about $3,661 in 2023 dollars). That AM/FM/8-track radio—or, in fact, any radio—was an extra-cost option as well, with a price tag of $363 ($2,616 after inflation). The MSRP for the 1973 Marquis Brougham sedan (known as a "pillared hardtop" thanks to the frameless window glass) was $5,072, which comes to $36,555 in today's dollars. Obviously, its out-the-door cost would have been much higher with all the options.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: