34k One 1 Owner Miles 2011 Mercury Grand Marquis Ls V8 Leather Cd Pwr Seats on 2040-cars

Auto blog

Watch as an out-of-control car demolishes gas pump

A Baltimore area man was fighting for his life Tuesday after crashing his car into a gas station. According to WBAL, the unidentified 64-year-old lost control of his vehicle for unknown reasons around 4:55 a.m. May 1 in Parkville, Md. The 2007 Mercury Milan careened downhill, ramped over a curb, and smashed full-speed into a gas station pump. The car then flipped and came to rest against one of the station's canopy support pillars. Don Karbowniczek, owner of a service station across the street, told WBAL he was shocked there wasn't more damage. It's also surprising that the car even made it to the pumps, as it had to thread past a coin-op vacuum machine, the station's sign, a utility pole, and a traffic light pole. "It came right through, took some of our bushes out, just trimmed them for us, and how it got through and flip the way it did, I don't know. From what I see on the marks, it had to go airborne and just come down on the pump," Karbowniczek said. Thankfully there was no fire or explosion. Gas pumps have shear valves - safety devices that immediately cut the flow of gasoline when a pump is damaged. The driver was rushed to a hospital with life-threatening injuries, and was in critical condition. Police theorized the driver may have become stricken with a health issue when he lost control. Related Video: News Source: WBAL Auto News Mercury maryland gas station

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.