Beautiful Automobile! Garaged Rust Free California Car. Excellent Condition on 2040-cars

Auto blog

Brabus to storm Geneva with 800-hp version of Mercedes SL65 AMG

At no point during our recent drive of the 2013 Mercedes-Benz SL65 AMG did we ever think, "You know, this thing sure is slow." After all, Merc's range-topping SL comes fitted with a twin-turbocharged 6.0-liter V12 capable of sending 621 horsepower and 738 pound-feet of torque to the rear wheels. But just in case you're still all "meh" about what the SL65 throws down, Brabus will gladly come to your rescue with this, the 800 Roadster.
As its name suggests, the 800 Roadster ups the V12's power figures to 800 horsepower and - wait for it - 1,047 pound-feet of torque. Don't get too excited, though - that torque number has been electronically limited to a measly 811 lb-ft since, you know, the transmission would probably explode if you tried to put the full force through it. Nevertheless, these represent increases of 79 hp and 73 lb-ft over the standard SL65, and that means the 800 Roadster can shoot to 62 miles per hour in just 3.7 seconds - two-tenths of a second quicker than the Merc its based on. More impressively, hitting 124 mph takes just under 10 seconds, and the droptop will finally top out at an electronically limited - limited! - 217 mph. Holy smokes.
To manage all of that speed, Brabus has engineered a special carbon fiber aero kit that reduces lift, and a unique control module for the SL65's active body control suspension lowers the ride height by one full inch. The 800 Roadster rides on new 20-inch wheels, and a unique limited-slip rear differential was added, featuring a 40 percent locking rate that further enhances performance when you're attempting to control the beast at its limits. Interior upgrades include new leather and alcantara surfaces throughout the cabin, including a leather-clad trunk.

Mercedes-Benz killing Maybach in 2013, replacing with S600 Pullman

According to an unnamed Mercedes-Benz source speaking with AutoWeek, the German automaker is killing off its Maybach line in 2013.
The unsurprising news comes after the brand was resurrected in 2002, but failed to meet sales expectations with its two core models, the Maybach 57 and 62. Further solidifying its fate, a deal with Aston Martin to aid in the development of future Maybachs fell through earlier this year.
According to the AutoWeek insider, the plan is to continue to sell both Maybach models through the end of 2013, after which the fifth-generation S-Class will go on sale. When that happens, three new variants of the S-Class will be available, including an all-new, range-topping S600 that brings back the Pullman moniker and may be better suited to competing with the likes of Bentley and Rolls-Royce.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...