2012 Mercedes Benz Gl450 4matic P1 Pkg Appearance Pk 3 Zone on 2040-cars

Auto blog

Mercedes CLA45 AMG Racing is ready for a spot on the grid

Mercedes-Benz trotted out its CLA45 AMG-based racer at the 2013 Frankfurt Motor Show. We first showed you the sedan in the deluge of news and reveals that precedes most good auto shows, and were blown away by the car, formally known as the CLA45 AMG Racing Series.
We were strolling by the Mercedes stand, and figured we'd pop in and take a look at the new racer and its carbon-fiber body panels, gutted interior, and race-sourced aero parts. It's a looker, both as a road car and a track weapon. It's not clear what series the CLA45 AMG will qualify for, although it does seem like a shoe-in for the World Touring Car Championship. Let us know what you think of the CLA racer down in the comments. In the meantime, we've got a full gallery of live images up top, along with the stock images that were posted last week on the Mercedes-Benz Facebook page.

Cigarette Racing unveils the AMG GT S-inspired 50-foot Marauder

The Cigarette Racing stand at the Miami Boat Show this morning hosted the latest in the eight-year collaboration between Mercedes-AMG and Cigarette Racing: the AMG GT S parked next to the fast-boat it inspired, the Cigarette Racing 50 Marauder GT S Concept. The vinyl ester resin and fiberglass go-fast boat is more than a matching Solarbeam yellow paint job with the coupe that inspired it. Like other carmakers who have partnered with companies outside the industry - such as Nissan's recent tie-up with NASA - there's an exchange of technology involved; Cigarette said that working with AMG on composites and bonding helped them drop 1,000 pounds off the Marauder GT S Concept compared to the standard Marauder twin-engine, which comes in at 14,200 pounds. Customers who order standard Marauders can request the weight reduction (for a price), but we were told that unless they plan to spend most of their time above 100 miles per hour, the extra weight contributes to a smoother ride. Mercedes head designer Gordon Wagener penned the exterior paint job and worked with Cigarette to design the cockpit trim, which would have seen him in familiar surroundings: Cigarette Racing owner Skip Braver is a long-time AMG customer, and the boat company based its bespoke department on the AMG Design Studio in Affalterbach. Every one of its boats is handbuilt in its factory in Opa-locka, Florida using some of the same processes seen in automaking, like bar codes to track the progress of hulls and components, computer controlled paint samples with digital files that can be sent around the world for matching, and doing all the stitching in-house to keep tabs on quality control. The engine compartment holds two, nine-liter, four-valve, DOHC, quad-cam, twin-turbocharged Mercury Racing engines with all-aluminum blocks, each one of them good for an electronically-limited 1,550 pound-feet of torque, and either 1,350 horsepower or 1,550 horsepower depending on whether you run regular 91-octane fuel or 116-octane race fuel. So yes, that's 3,100 hp and 3,100 lb-ft at once, if you go all out. Mercury says they're the most powerful powerful emissions-certified gas-powered marine engines you can buy. The engines don't have knock sensors, though, so you have to turn a key to register the kind of fuel you're putting in, and you can switch from one to the other when two 150-gallon tanks are down to 10-percent full.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...