2015 Mercedes-benz M-class Ml 350 on 2040-cars

Auto blog

2019 Autoblog Technology of the Year finalists revealed

Every fall, we line up a range of new models with the latest and most compelling automotive technology from the past year. We test everything from semi-autonomous systems like Tesla's Autopilot to trick suspension setups like the Multimatic spool-valve shocks on the Chevy Colorado ZR2. We spend months paring down the list to a small group of contenders. After testing, dinner and healthy debate, we tally up the votes and name our winner. For Autoblog's 2019 Technology of the Year Award, our three finalists are the Cadillac CT6 with Super Cruise, the Infiniti QX50 with Variable Compression Turbo and the Mercedes-AMG E 53 with EQ Boost. Super Cruise is an advanced SAE Level 2 semi-autonomous system, though Cadillac (unlike some of its rivals) is reluctant to push that point. Cadillac would like you to think of this as an advanced driver assistance feature rather than a semi-autonomous system. Super Cruise allows completely hands-free highway driving. Thanks to a driver-facing camera, the system forces the driver to keep his or her eyes on the road even if hands are off the wheel. Although the CT6 is being discontinued, look for Super Cruise to make its way to other Cadillacs soon. VC Turbo is a little more complicated. Basically, Infiniti's 2.0-liter turbocharged inline-four can vary the compression ratio on the fly. In general, turbocharged engines are more efficient than naturally-aspirated engines when on boost, but can perform worse at low revs. VC Turbo allows for a best-of-both-worlds situation, increasing the compression at low revs and backing it off once the turbo spools up. The best part is that it does so seamlessly, with only a dash readout letting you know what's going on under the hood. Our third finalist is the EQ Boost 48-volt system in the Mercedes-AMG E 53. Like VC Turbo, EQ Boost does a lot just beneath the surface. Mercedes has developed a new turbocharged 3.0-liter inline-six and paired it with a small electric motor. While the car can't run on electricity alone, the motor helps improve both efficiency and performance, smoothing shifts and filling in low-end torque before the turbos spool up. Think torque fill, similar to a McLaren P1. Who can complain about better fuel economy and more torque? Look for the 48-volt system to make its way into most of the Mercedes-Benz lineup. The winner will be revealed next week on Autoblog, and we'll present the award Jan. 15 at the Detroit Auto Show. Related Video:

Formula One speeds towards radical thousand-horsepower shakeup

The teams, the drivers, the fans, the circuits... few, if any, were satisfied with how Formula One has shaped up since the current regulations took hold last year. But that doesn't mean they aren't working on it. At a recent meeting of the F1 Strategy Group, the leading parties in the sport outlined a new framework that would radically shake up the cars themselves while keeping costs in check. And the biggest change could see the engines producing around 1,000 horsepower. Although a proposal put forth by Ferrari to ditch the current V6 hybrid engines in favor of new twin-turbocharged units was rejected by Honda and Mercedes, the members of the group approved in principal to increase the fuel flow in the existing engines to dramatically boost output. As it stands, the current 1.6-liter turbocharged V6 engines develop around 600 horsepower, with an additional 160 or so kicked in by the electric Energy Recovery System, for a combined output of about 760 hp. What's not clear at the moment is whether the increased fuel flow would necessitate either the return of mid-race refueling (currently banned) or the installation of larger fuel tanks. Red Bull and McLaren also submitted proposals to radically redesign the shape of the cars as well, however a more evolutionary approach was adopted instead. Though far from finalized, the new design would keep the same basic form of the current chassis, but with adjustments to make them more aesthetically pleasing while producing more downforce. Wider tires are also said to be part of the mix. With more power and more grip from the tires and aero, the resulting cars would most certainly end up going much faster than the current ones, which are already starting to nudge the lap records at some of the circuits, many of which were set during the V10 era. The F1 Strategy Group is made up of representatives of the FIA, Formula One Management and six leading teams. The next step will be for the teams' technical directors to iron out how to implement what their bosses have agreed to. If they settle the details fast enough, the revised regulations could be pushed through in time for next season. News Source: AutosportImage Credit: Mark Thompson/Getty Motorsports Ferrari Honda Infiniti McLaren Mercedes-Benz F1

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...