07 Mercedes Gl450 Awd Leather Gps Navi Heated Seats Sunroof Certified Pre Owned on 2040-cars

Auto blog

Smart brand might be doomed

Reports are painting a less than rosy picture of the Smart brand's future. The Daimler-owned carmaker is going fully electric in 2020, but that might not be enough to keep it alive for long. Inside sources, quoted by Automobile Magazine, are saying Renault is likely to pull out of the partnership that created the current Smart ForTwo/Renault Twingo pairing introduced in 2014. The two rear-engined cars share a platform, and when the current Twingo is done for, Renault might want to part ways. In addition, Mercedes isn't willing to prop up Smart on its own, and there is a possibility that the entire Smart brand could be shuttered by 2026. A previous joint venture was the ForFour hatch co-developed with Mitsubishi, and despite the ForFour name living on in the current generation rear-engined car, the earlier FWD hatchback has quickly been forgotten. Not long ago, Smart presented its Forease open-top concept to give customers a glimpse of what future Smart cars would look like, but at its heart the Forease was still a current Smart dressed up with concept car details. The next-generation Mercedes-Benz A-Class is to be signed off in 2021 for a 2025 introduction, and it can be underpinned by a more flexible, fully scalable platform that could also serve to support a new entry-level Mercedes-Benz vehicle that could render the separate Smart brand pointless. Then there's Geely, who now owns nearly 10 percent of Daimler, and who is partnering with Daimler to launch a new "premium" ride-hailing venture in China. As Geely develops its mobility solutions, it is likely to keep an eye on Smart: Smart cars have been car-sharing staples around the world for quite a while, from users such as Car2Go. Automobile Magazine says that if a Smart is co-developed with Geely, it might suit the Chinese market well, but a global business case might be challenging. In any case, if Smart wants to survive beyond the current Renault partnership, the new model should be agreed upon quickly, and it must be based on a platform flexible enough to support full electric drive. Reportedly, there are now ongoing feasibility studies for a fully electric Daimler "U-Class," which would include a Smart-like three or five-door hatch with two wheelbase options, a ride-sharing shuttle with autonomous capabilities, and an urban delivery panel van. But Smart must justify itself for the upcoming decades, or the future Daimler products that occupy its niche will be wearing a three-pointed star instead.

Next Aston Vantage will be the only way to get an AMG V8 with a stick

With only a few exceptions, most of them factory customs, AMG hasn't built cars with manual transmissions. It just isn't the way things are done in Affalterbach. But now that Mercedes's in-house speed shop will be supplying engines to Aston Martin, the world will be treated to cars with three pedals and overengineered German V8s wrapped in a pretty British package. We're into it. The news comes from Car and Driver, which spoke to Aston Martin CEO Andy Palmer about the new Vantage among other things. Palmer confirms to C/D that the Vantage will continue to offer manual and automatic transmissions when the next-gen car arrives featuring the AMG 4.0-liter twin-turbo V8. In its most potent form, the eight-cylinder makes 503 horsepower and 479 lb-ft of torque in the AMG GT S. Figure on a little more from the Aston-ized version, just for fun. The current V8 Vantage GT makes 430 hp and 361 lb-ft from its naturally aspirated 4.7-liter. While some may lament the new engine's forced induction, that added power and the thoroughly modern behavior of the AMG engine should be welcome. While the AMG V8 is currently only planned to go into Aston's entry-level car, C/D does mention a possibility of it (and perhaps its three-pedal transmission) making its way into other cars as an economy option for certain markets. If a V8 DB11 were to be offered, don't expect it to show up here, though. There's also no word on who will supply the manual for the AMG-Aston mashup, but it likely will be a transaxle like the current Vantage. Ex-factory manual AMGs aren't totally unprecedented. Pagani has built some three-pedal cars with its massaged AMG V12s. Compared to those, however, these manual Vantages can be considered mass-production cars. And really, any increase in the number of sticks mated to AMG engines can only be a good thing. Related Video: News Source: Car and Driver Aston Martin Mercedes-Benz Coupe Performance mercedes-amg confirmed aston martin v8 vantage aston martin vantage

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...