'08 Mercedes Benz C300 -1 Owner- Outstanding Condition - 27300 Miles - New Tires on 2040-cars

Auto blog

2013 Mercedes-Benz SLS AMG GT Coupe

Mercedes-Benz upgraded its SLS flagship Coupe and Roadster for the 2013 model year, and the changes are marked with them new "GT" nomenclature. Both SLS models arrive with a retuned naturally aspired 6.2-liter V8 delivering 583 horsepower and 479 pound-feet of torque (the horses are up from 563, but the torque remains the same) mated to a revised seven-speed AMG Speedshift dual-clutch gearbox. Rounding out the mechanical upgrades is a redeveloped AMG two-mode adaptive suspension. Physically, the revised models are differentiated by their new "GT" badging, darkened headlight/taillight buckets, red brake calipers, unique wheel colors and high gloss finish on the front grille, exterior mirrors and hood/fender fins. Inside the cabin are new red seatbelts, Alcantara upholstery and contrasting red stitching.
As it is nearly impossible to experience the aluminum gullwing beast on public roads, Mercedes invited out to Southern California's Willow Springs to wring out the 2013 SLS GT Coupe on a racing circuit.

Comparison test: 2019 Acura RDX vs. compact luxury SUV competitors

Truth be told, if we were to compare the all-new 2019 Acura RDX with those compact luxury crossover SUVs it would most likely be cross-shopped against, you'd be looking at a different list. Even Acura admits that Lexus and Infiniti are the most likely bogies, but with the 2019 RDX, Honda's luxury brand is attempting to attract those customers who think as much with their hearts as with their heads. And for the most part, those folks have been buying from German brands: the Audi Q5, BMW X3 and Mercedes-Benz GLC-Class. So, to show how the new RDX compares to them, Acura actually provided examples of each during the recent press drive along with a Volvo XC60. All were determined to have greater emotional appeal than the last RDX, and we would certainly agree. For, as much as the previous-generation RDX made sense on paper, it was really hard to get excited about it. And when you're paying extra for a luxury vehicle, shouldn't you get a little excited? Well, as luck would have it, Consumer Editor Jeremy Korzeniewski and I were on hand in Whistler, British Columbia, for the press launch. We didn't have an abundance of time in each RDX competitor, but in conjunction with our usual comparison chart, our impressions should provide a good first taste of how the new RDX compares. Performance and fuel economy Contributing Editor James Riswick: On paper at least, the RDX is gutsier than its comparably powered European rivals. It also weighs the same or less, which logically should mean it'll be the quickest in a straight line. During my brief drives, though, I'm not sure it really stood taller than the three Germans. It at least matches them for smoothness, which is something that can't be said about the Volvo. Fuel economy is lower than them all when you consider all but the Mercedes come standard with all-wheel drive. It's also worth noting that all the competitors are available with engine upgrades, and unless Acura's forthcoming resurrection of Type S models includes the RDX, it should stay that way. Consumer Editor Jeremy Korzeniewski: Line 'em all up in a drag race, and I have a feeling the Acura would squirt away to victory. A good bit of that, though, would be due to its 10-speed automatic transmission, which offers a huge spread of ratios and fires off extremely quick shifts. In the real world, I'd guess fuel economy will be similar across the board, so I'm willing to call that category a draw.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...